Content .. 55 56 57 58 ..

Nissan Juke (2016 year). Service Repair Manual - part 57

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

BRC-49

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

BRC

DTC Inspection Priority Chart

INFOID:0000000012199672

When multiple DTCs are displayed simultaneously, check one by one depending on the following priority list.

C1145

When a malfunction is detected in yaw rate signal, or signal line of yaw rate/side/
decel G sensor is open or shorted.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential

(BLSD) function

C1146

When a malfunction is detected in side G signal, or signal line of yaw rate/side/decel
G sensor is open or shorted.

C1155

When brake fluid level low signal is detected.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

C1164

When a malfunction is detected in cut valve 1.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1165

When a malfunction is detected in cut valve 2.

C1166

When a malfunction is detected in suction valve 1.

C1167

When a malfunction is detected in suction valve 2.

C1170

When the information in ABS actuator and electric unit (control unit) is not the same.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• Brake limited slip differential

(BLSD) function

C1176

When brake pedal position switch signal is not input when brake pedal operates.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

U1000

When CAN communication signal is not continuously transmitted or received for 2
seconds or more.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

U1010

When detecting error during the initial diagnosis of CAN controller of ABS actuator
and electric unit (control unit).

DTC

Malfunction detected condition

Fail-safe condition

Priority

Detected item (DTC)

• U1000 CAN COMM CIRCUIT
• U1010 CONTROL UNIT (CAN)

• C1110 CONTROLLER FAILURE
• C1170 VARIANT CODING

• C1130 ENGINE SIGNAL 1
• C1144 ST ANG SEN SIGNAL

• C1109 BATTERY VOLTAGE [ABNORMAL]
• C1111 PUMP MOTOR
• C1140 ACTUATOR RLY

Revision: November 2015

2016 JUKE

BRC-50

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

DTC Index

INFOID:0000000012199673

• C1101 RR RH SENSOR-1
• C1102 RR LH SENSOR-1
• C1103 FR RH SENSOR-1
• C1104 FR LH SENSOR-1
• C1105 RR RH SENSOR-2
• C1106 RR LH SENSOR-2
• C1107 FR RH SENSOR-2
• C1108 FR LH SENSOR-2
• C1113 G-SENSOR
• C1115 ABS SENSOR [ABNORMAL SIGNAL]
• C1116 STOP LAMP SW
• C1120 FR LH IN ABS SOL
• C1121 FR LH OUT ABS SOL
• C1122 FR RH IN ABS SOL
• C1123 FR RH OUT ABS SOL
• C1124 RR LH IN ABS SOL
• C1125 RR LH OUT ABS SOL
• C1126 RR RH IN ABS SOL
• C1127 RR RH OUT ABS SOL
• C1143 ST ANG SEN CIRCUIT
• C1145 YAW RATE SENSOR
• C1146 SIDE G SEN CIRCUIT
• C1164  CV  1
• C1165  CV  2
• C1166  SV  1
• C1167  SV  2
• C1176 STOP LAMP SW2