Nissan Juke (2016 year). Service Repair Manual - part 35

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-37

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

RETAIND PWR : CONSULT Function (BCM - RETAINED PWR)

INFOID:0000000012965019

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)

INFOID:0000000012200716

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

ACTIVE TEST

AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM - AIR PRESSURE MONI-
TOR)

INFOID:0000000012965037

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

SELF DIAGNOSTIC RESULT

Refer to 

BCS-62, "DTC Index"

.

DATA MONITOR MODE

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

Monitor Item

Description

DOOR SW-DR

Indicates [ON/OFF] condition of driver side door switch.

DOOR SW-AS

Indicates [ON/OFF] condition of passenger side door switch.

Monitor item [UNIT]

Description

PUSH SW
[Off/On]

Displays the status of the push-button ignition switch (push switch) judged by BCM.

Test item

Opera-

tion

Description

OIL PRESSURE SW

Off

NOTE:

This item is indicated, but not tested.

On

Diagnosis mode

Function Description

Self Diagnostic Result

Displays the diagnosis results judged by BCM.

Data Monitor

The BCM input/output signals are displayed.

Active Test

The signals used to activate each device are forcibly supplied from BCM.

Work Support

Components can be quickly and accurately adjusted.

Revision: November 2015

2016 JUKE

BCS-38

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST MODE

NOTE:

After completing the work below, perform an active test.

1. Check ID registration state and perform self-diagnosis.

2. Erase the self-diagnosis result history.

WORK SUPPORT

Monitor item (Unit)

Remarks

AIR PRESS FL
(kPa, kg/cm2 or Psi)

Tire pressure

AIR PRESS FR
(kPa, kg/cm2 or Psi)

AIR PRESS RR
(kPa, kg/cm2 or Psi)

AIR PRESS RL
(kPa, kg/cm2 or Psi)

ID REGST FL1
(Yet, Done)

Registration ID

ID REGST FR1
(Yet, Done)

ID REGST RR1
(Yet, Done)

ID REGST RL1
(Yet, Done)

WARNING LAMP
 (On/Off)

Low tire pressure warning lamp

BUZZER
 (On/Off)

NOTE:

This item is displayed, but cannot be use this item.

Item

Description

WARNING LAMP

Low tire pressure warning lamp can be turned ON arbitrarily.

ID REGIST WARNING

NOTE:

Displayed but not used in TPMS.

RUN FLAT TIRE W/L

NOTE:

Displayed but not used in TPMS.

RUN FLAT/T WARN BUZZER

NOTE:

Displayed but not used in TPMS.

FLASHER

Turn signal lamps can be turned ON arbitrarily.

HORN

This test is able to check to check that the horn sounds.

Item

Description

ID READ

Registered tire pressure sensor ID can be displayed.

ID REGIST

Tire pressure sensor ID can be registered.

Revision: November 2015

2016 JUKE

BCS

BCM

BCS-39

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ECU DIAGNOSIS INFORMATION

BCM

Reference Value

INFOID:0000000012200718

VALUES ON THE DIAGNOSIS TOOL

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

CONSULT MONITOR ITEM

Monitor Item

Condition

Value/Status

FR WIPER HI

Other than front wiper switch HI

Off

Front wiper switch HI

On

FR WIPER LOW

Other than front wiper switch LO

Off

Front wiper switch LO

On

FR WASHER SW

Front washer switch OFF

Off

Front washer switch ON

On

FR WIPER INT

Other than front wiper switch INT

Off

Front wiper switch INT

On

FR WIPER STOP

Front wiper is not in STOP position

Off

Front wiper is in STOP position

On

INT VOLUME

Wiper intermittent dial is in a dial position 1 - 7

Wiper intermittent dial 

position

RR WIPER ON

Other than rear wiper switch ON

Off

Rear wiper switch ON

On

RR WIPER INT

Other than rear wiper switch INT

Off

Rear wiper switch INT

On

RR WASHER SW

Rear washer switch OFF

Off

Rear washer switch ON

On

RR WIPER STOP

Rear wiper is in STOP position

Off

Rear wiper is not in STOP position

On

TURN SIGNAL R

Other than turn signal switch RH

Off

Turn signal switch RH

On

TURN SIGNAL L

Other than turn signal switch LH

Off

Turn signal switch LH

On

TAIL LAMP SW

Other than lighting switch 1ST and 2ND

Off

Lighting switch 1ST or 2ND

On

HI BEAM SW

Other than lighting switch HI

Off

Lighting switch HI

On

HEAD LAMP SW 1

Other than lighting switch 2ND

Off

Lighting switch 2ND

On

HEAD LAMP SW 2

Other than lighting switch 2ND

Off

Lighting switch 2ND

On

PASSING SW

Other than lighting switch PASS

Off

Lighting switch PASS

On

AUTO LIGHT SW

Other than lighting switch AUTO

Off

Lighting switch AUTO

On

Revision: November 2015

2016 JUKE

BCS-40

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

FR FOG SW

Front fog lamp switch OFF

Off

Front fog lamp switch ON

On

DOOR SW-DR

Driver door closed

Off

Driver door opened

On

DOOR SW-AS

Passenger door closed

Off

Passenger door opened

On

DOOR SW-RR

Rear RH door closed

Off

Rear RH door opened

On

DOOR SW-RL

Rear LH door closed

Off

Rear LH door opened

On

DOOR SW-BK

Back door closed

Off

Back door opened

On

CDL LOCK SW

Other than power door lock switch LOCK

Off

Power door lock switch LOCK

On

CDL UNLOCK SW

Other than power door lock switch UNLOCK

Off

Power door lock switch UNLOCK

On

KEY CYL LK-SW

Other than driver door key cylinder LOCK position

Off

Driver door key cylinder LOCK position

On

KEY CYL UN-SW

Other than driver door key cylinder UNLOCK position

Off

Driver door key cylinder UNLOCK position

On

HAZARD SW

Hazard switch is OFF

Off

Hazard switch is ON

On

REAR DEF SW

Rear window defogger switch OFF

Off

Rear window defogger switch ON

On

TR/BD OPEN SW

Back door opener switch OFF

Off

While the back door opener switch is turned ON

On

TRNK/HAT MNTR

NOTE:

The item is indicated, but not monitored. 

Off

FAN ON SIG

Blower fan OFF

Off

Blower fan ON

On

AIR COND SW

Air conditioner OFF (A/C switch indicator OFF)

Off

Air conditioner ON (A/C switch indicator ON)

On

RKE-LOCK

LOCK button of the key is not pressed

Off

LOCK button of the key is pressed

On

RKE-UNLOCK

UNLOCK button of the key is not pressed

Off

UNLOCK button of the key is pressed

On

RKE-TR/BD

NOTE:

The item is indicated, but not monitored. 

Off

RKE-PANIC

PANIC button of the key is not pressed

Off

PANIC button of the key is pressed

On

RKE-MODE CHG

LOCK/UNLOCK button of the key is not pressed and held simultaneously

Off

LOCK/UNLOCK button of the key is pressed and held simultaneously

On

OPTI SEN (DTCT)

Bright outside of the vehicle

Close to 5 V

Dark outside of the vehicle

Close to 0 V

Monitor Item

Condition

Value/Status

Revision: November 2015

2016 JUKE

BCS

BCM

BCS-41

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

OPTI SEN (FILT)

Bright outside of the vehicle (Lighting switch AUTO)

Close to 5 V

Dark outside of the vehicle (Lighting switch AUTO)

Close to 1.50 V

OPTICAL SENSOR

NOTE:

The item is indicated, but not monitored. 

Off

RAIN SENSOR

NOTE:

The item is indicated, but not monitored. 

Off

REQ SW -DR

Driver door request switch is not pressed

Off

Driver door request switch is pressed

On

REQ SW -AS

Passenger door request switch is not pressed

Off

Passenger door request switch is pressed

On

REQ SW -RR

NOTE:

The item is indicated, but not monitored. 

Off

REQ SW -RL

NOTE:

The item is indicated, but not monitored. 

Off

REQ SW -BD/TR

Back door request switch is not pressed

Off

Back door request switch is pressed

On

PUSH SW

Push-button ignition switch (push switch) is not pressed

Off

Push-button ignition switch (push switch) is pressed

On

CLUCH SW

The clutch pedal is not depressed. 

Off

The clutch pedal is depressed

On

BRAKE SW 1

The brake pedal is not depressed

Off

The brake pedal is depressed

On

BRAKE SW 2

The brake pedal is depressed when No. 38 fuse is blown

Off

The brake pedal is not depressed when No. 38 fuse is blown, or No. 38 
fuse is normal

On

DETE/CANCL SW

NOTE:

For M/T models this item is not 
used.

Selector lever in P position

Release selector button

Off

Push selector button

On

Selector lever in any position other than P

SFT PN/N SW

• Selector lever in any position other than P and N (CVT models)
• Control lever in any position other than neutral (M/T models)

Off

• Selector lever in P or N position (CVT models)
• Control lever in neutral position (M/T models)

On

S/L -LOCK

NOTE:

The item is indicated, but not monitored. 

Off

S/L -UNLOCK

NOTE:

The item is indicated, but not monitored. 

Off

S/L RELAY-F/B

NOTE:

The item is indicated, but not monitored. 

Off

UNLK SEN -DR

Driver door is locked

Off

Driver door is unlocked

On

PUSH SW -IPDM

Push-button ignition switch (push-switch) is not pressed

Off

Push-button ignition switch (push-switch) is pressed

On

IGN RLY1 -F/B

Ignition switch in OFF or ACC position

Off

Ignition switch in ON position

On

DETE SW -IPDM

NOTE:

For M/T models this item is not 
used.

Selector lever in any position other than P

Off

Selector lever in P position

Push selector button

Release selector button

On

Monitor Item

Condition

Value/Status

Revision: November 2015

2016 JUKE

BCS-42

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

SFT PN -IPDM

NOTE:

For M/T models this item is not 
used.

Selector lever in any position other than P and N

Off

Selector lever in P or N position

On

SFT P -MET

NOTE:

For M/T models this item is not 
used.

Selector lever in any position other than P

Off

Selector lever in P position

On

SFT N -MET

NOTE:

For M/T models this item is not 
used.

Selector lever in any position other than N

Off

Selector lever in N position

On

ENGINE STATE

Engine stopped

Stop

While the engine stalls

Stall

At engine cranking

Crank

Engine running

Run

S/L LOCK-IPDM

NOTE:

The item is indicated, but not monitored. 

Off

S/L UNLK-IPDM

NOTE:

The item is indicated, but not monitored. 

Off

S/L RELAY-REQ

NOTE:

The item is indicated, but not monitored. 

Off

VEH SPEED 1

While driving

Equivalent to speed-

ometer reading

VEH SPEED 2

While driving

Equivalent to speed-

ometer reading

DOOR STAT-DR

Driver door is locked

LOCK

Wait with selective unlock operation (60 seconds)

READY

Driver door is unlocked

UNLOCK

DOOR STAT-AS

Passenger door is locked

LOCK

Wait with selective unlock operation (60 seconds)

READY

Passenger door is unlocked

UNLOCK

ID OK FLAG

Driver side door is open after ignition switch is turned OFF
(Shift position is in the P position)

Reset

Ignition switch ON

Set

PRMT ENG STRT

The engine start is prohibited

Reset

The engine start is permitted

Set

PRMT RKE STRT

NOTE:

The item is indicated, but not monitored. 

Reset

RKE OPE COUN1

During the operation of the key

Operation frequency 

of the key

RKE OPE COUN2

NOTE:

The item is indicated, but not monitored. 

—

CONFRM ID ALL

The key ID that the key slot receives is not recognized by any key ID reg-
istered to BCM.

Yet

The key ID that the key slot receives is recognized by any key ID regis-
tered to BCM.

Done

CONFIRM ID4

The key ID that the key slot receives is not recognized by the fourth key ID 
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the fourth key ID reg-
istered to BCM.

Done

Monitor Item

Condition

Value/Status

Revision: November 2015

2016 JUKE

BCS

BCM

BCS-43

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

CONFIRM ID3

The key ID that the key slot receives is not recognized by the third key ID 
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the third key ID reg-
istered to BCM.

Done

CONFIRM ID2

The key ID that the key slot receives is not recognized by the second key 
ID registered to BCM.

Yet

The key ID that the key slot receives is recognized by the second key ID 
registered to BCM.

Done

CONFIRM ID1

The key ID that the key slot receives is not recognized by the first key ID 
registered to BCM.

Yet

The key ID that the key slot receives is recognized by the first key ID reg-
istered to BCM.

Done

NOT REGISTERED

BCM detects registered key ID, or BCM does not detect key ID. 

ID OK

BCM detects non-registration key ID.

ID NG

TP 4

The ID of fourth key is not registered to BCM

Yet

The ID of fourth key is registered to BCM

Done

TP 3

The ID of third key is not registered to BCM

Yet

The ID of third key is registered to BCM

Done

TP 2

The ID of second key is not registered to BCM

Yet

The ID of second key is registered to BCM

Done

TP 1

The ID of first key is not registered to BCM

Yet

The ID of first key is registered to BCM

Done

AIR PRESS FL

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of front 

LH tire

AIR PRESS FR

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of front 

RH tire

AIR PRESS RR

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of rear 

RH tire

AIR PRESS RL

Ignition switch ON (Only when the signal from the transmitter is received)

Air pressure of rear 

LH tire

ID REGST FL1

ID of front LH tire transmitter is registered

Done

ID of front LH tire transmitter is not registered

Yet

ID REGST FR1

ID of front RH tire transmitter is registered

Done

ID of front RH tire transmitter is not registered

Yet

ID REGST RR1

ID of rear RH tire transmitter is registered

Done

ID of rear RH tire transmitter is not registered

Yet

ID REGST RL1

ID of rear LH tire transmitter is registered

Done

ID of rear LH tire transmitter is not registered

Yet

WARNING LAMP

Tire pressure indicator OFF

Off

Tire pressure indicator ON

On

BUZZER

Tire pressure warning alarm is not sounding

Off

Tire pressure warning alarm is sounding

On

Monitor Item

Condition

Value/Status

Revision: November 2015

2016 JUKE

BCS-44

< ECU DIAGNOSIS INFORMATION >

[WITH INTELLIGENT KEY SYSTEM]

BCM

TERMINAL LAYOUT

PHYSICAL VALUES

JMMIA0323ZZ

Revision: November 2015

2016 JUKE