Nissan Juke (2016 year). Service Repair Manual - part 29

 

  Index      Manuals     Nissan Juke (2016 year) - Service and Repair Manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

Content      ..     27      28      29      30     ..

 

 

Nissan Juke (2016 year). Service Repair Manual - part 29

 

 

AV-220

< BASIC INSPECTION >

[INTEGRATED CONTROL SYSTEM]

DIAGNOSIS AND REPAIR WORK FLOW

BASIC INSPECTION

DIAGNOSIS AND REPAIR WORK FLOW

Work Flow

INFOID:0000000012202622

DESCRIPTION OF TROUBLE DIAGNOSIS FLOWCHART

DETAILS OF TROUBLE DIAGNOSIS FLOWCHART

1.

OBTAIN INFORMATION ABOUT SYMPTOM

Interview the customer to obtain as much information as possible about the conditions and environment under

which the malfunction occurs.

>> GO TO 2.

2.

CHECK SYMPTOM

• Check the symptom based on the information obtained from the customer.

• Check if any other malfunctions are present.

>> GO TO 3.

3.

CONSULT SELF-DIAGNOSIS

1. Perform “MULTI DISPLAY” “self diagnosis” by connecting CONSULT.

2. When DTC is detected, follow the instructions below:

-

Record DTC and Freeze Frame Data.

NOTE:

If “CAN COM CIRC [U1000]” is displayed, start the diagnosis from the CAN communication system. Refer to

AV-222, "Diagnosis Procedure"

.

Is any DTC No. displayed?

YES

>> GO TO 4.

NO

>> GO TO 5.

4.

DTC/SYSTEM DIAGNOSIS

JSNIA4500GB

Revision: November 2015

2016 JUKE

AV

DIAGNOSIS AND REPAIR WORK FLOW

AV-221

< BASIC INSPECTION >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

1. Perform a DTC/system diagnosis and repair or replace any malfunctioning part.

2. When DTC is detected, follow the instructions below:

-

Record DTC and Freeze Frame Data.

>> GO TO 6.

5.

PERFORM DIAGNOSIS BY SYMPTOM

Perform a diagnosis by symptom and repair or replace any malfunctioning part.

>> GO TO 6.

6.

FINAL CHECK

Check that the multi display unit functions normally.
Does it operate normally?

YES

>> End of trouble diagnosis

NO

>> GO TO 2.

Revision: November 2015

2016 JUKE

AV-222

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

U1000 CAN COMM CIRCUIT

DTC/CIRCUIT DIAGNOSIS

U1000 CAN COMM CIRCUIT

Description

INFOID:0000000012202623

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-board mul-

tiplex communication line with high data communication speed and excellent error detection ability. A modern

vehicle is equipped with many ECUs, and each control unit shares information and links with other control

units during operation (not independent). In CAN communication, 2 control units are connected with 2 commu-

nication lines (CAN-L-line and CAN-H-line) allowing a high rate of information transmission with less wiring.

Each control unit transmits/receives data but selectively reads required data only.

Refer to 

LAN-30, "CAN COMMUNICATION SYSTEM : CAN Communication Signal Chart"

 for details of the

communication signal.

DTC Logic

INFOID:0000000012202624

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202625

1.

PERFORM SELF-DIAGNOSIS

1. Turn the ignition switch ON and hold it for 2 seconds or more.

2. Using CONSULT, check the ”self diagnosis result“ of ”MULTI DISPLAY“.
Is CAN communication system displayed?

YES

>> Refer to 

LAN-17, "Trouble Diagnosis Flow Chart"

NO

>> Refer to 

GI-45, "Intermittent Incident"

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1000

CAN COMM CIRCUIT

Multi display unit cannot transmit and receive 
any CAN communication signal for 2 seconds 
or more

CAN communication system

Revision: November 2015

2016 JUKE

AV

U1010 CONTROL UNIT (CAN)

AV-223

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

U1010 CONTROL UNIT (CAN)

Description

INFOID:0000000012202626

Initial diagnosis of multi display unit

DTC Logic

INFOID:0000000012202627

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202628

1.

REPLACE THE MULTI DISPLAY UNIT

If DTC U1010 is detected, replace the multi display unit. 

AV-231, "Removal and Installation"

.

>> INSPECTION END

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1010

CONTROL UNIT (CAN)

Malfunction is detected during initial diagnosis 
of multi display unit CAN controller

Multi display unit

Revision: November 2015

2016 JUKE

AV-224

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

U1402 ENGINE SPEED SIGNAL

U1402 ENGINE SPEED SIGNAL

DTC Logic

INFOID:0000000012202629

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202630

1.

PERFORM ECM SELF DIAGNOSIS

Using CONSULT, check the “self diagnosis result” of “ENGINE” and repair or replace any malfunctioning parts.

>> Refer to 

EC-115, "DTC Index"

 (MR FOR NISMO RS MODELS) or 

EC-706, "DTC Index"

 (MR

EXCEPT FOR NISMO RS MODELS).

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1402

ENGINE SPEED SIGNAL

ECM continuously transmits abnormal engine 
speed signal for 2 seconds or more

ECM

Revision: November 2015

2016 JUKE

AV

U1405 ENGINE TORQUE SIGNAL

AV-225

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

U1405 ENGINE TORQUE SIGNAL

DTC Logic

INFOID:0000000012202631

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202632

1.

PERFORM ECM SELF-DIAGNOSIS

Using CONSULT, check the “self diagnosis result” of “ENGINE” and repair or replace any malfunctioning parts.

>> Refer to 

EC-115, "DTC Index"

 (MR FOR NISMO RS MODELS) or 

EC-706, "DTC Index"

 (MR

EXCEPT FOR NISMO RS MODELS).

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1405

ENGINE TORQUE SIG-
NAL

ECM continuously transmits abnormal engine 
torque signals for 2 seconds or more

ECM

Revision: November 2015

2016 JUKE

AV-226

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

U1406 BOOST PRESSURE INPUT

U1406 BOOST PRESSURE INPUT

DTC Logic

INFOID:0000000012202633

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202634

1.

PERFORM ECM SELF-DIAGNOSIS

Using CONSULT, check the “self diagnosis result” of “ENGINE” and repair or replace any malfunctioning parts.

>> Refer to 

EC-115, "DTC Index"

 (MR FOR NISMO RS MODELS) or 

EC-706, "DTC Index"

 (MR

EXCEPT FOR NISMO RS MODELS).

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1406

BOOST PRESSURE IN-
PUT

ECM continuously transmits abnormal boost 
pressure signals for 2 seconds or more

ECM

Revision: November 2015

2016 JUKE

AV

U1412 LONG ACC INPUT

AV-227

< DTC/CIRCUIT DIAGNOSIS >

[INTEGRATED CONTROL SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

U1412 LONG ACC INPUT

DTC Logic

INFOID:0000000012202635

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000012202636

1.

PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS

Using CONSULT, check the “self diagnosis result” of “ABS” and repair or replace any malfunctioning parts.

>> Refer to 

BRC-50, "DTC Index"

.

DTC

Display contents of CON-

SULT

Malfunction detection condition

Probable malfunction location

U1412

LONG ACC INPUT

Abnormal decel G sensor signals are input 
from ABS actuator and electric unit (control 
unit) for 2 seconds or more

ABS actuator and electric unit (control unit)

Revision: November 2015

2016 JUKE

 

 

 

 

 

 

 

Content      ..     27      28      29      30     ..