Content .. 25 26 27 28 ..

Nissan Juke (2016 year). Service Repair Manual - part 27

AV-204

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

SYSTEM

Input signal

SYSTEM DESCRIPTION

• The multi display unit receives necessary information for controlling the following functions from the respec-

tive units via CAN communication.

- D-MODE function

- Information display/setting

- Air conditioner adjustment function. Refer to

HAC-12, "System Description"

• The multi display unit transmits the status of user-selected D-MODE (NORMAL, SPORT, or ECO) to the

TCM (CVT models), ECM (M/T models), EPS control unit and A/C auto amp. For the D-MODE functions,

refer to

DMS-7, "System Description"

• TCM transmits to ECM the D-MODE status (NORMAL, SPORT, or ECO) received from the multi display unit

(CVT models).

• ECM (M/T models) and EPS control unit receives the D-MODE status (NORMAL, SPORT, or ECO) from the

multi display unit.

• The A/C auto amp. receives the air conditioner switch operation signal, ECO mode signal, and ECO mode

switch signal from the multi display unit.

• The multi display unit integrates a diagnosis function that allows a diagnosis by CONSULT.

Nissan Dynamic Control System Display/Setting Functions

EPS control unit

ECO mode signal

Transmits the “D-MODE” ECO switch status of the multi display unit.

NORMAL mode signal

Transmits the “D-MODE” NORMAL switch status of the multi display
unit.

SPORT mode signal

Transmits the “D-MODE” SPORT switch status of the multi display unit.

Transmit unit

Signal name

Description

A/C auto amp.

A/C display signal

Receives a display signal according to the air conditioner status from
the A/C auto amp.

ECM

Engine speed signal

Receives the engine speed signal.

Engine torque signal

Receives the engine torque signal calculated by ECM.

Fuel consumption monitor signal

Receives the consumption monitor signal calculated by ECM.

Boost pressure signal

Receives the boost pressure signal calculated by ECM.

Engine status signal

Receives the engine status signal.

BCM

Position light request signal

Receives a position light request signal according to the light switch
status.

ABS actuator and
electric unit (control
unit)

Decel G sensor signal

Receives the decel. G sensor signal calculated by the ABS actuator
and electric unit (control unit).

Side G sensor signal

Receives the side G sensor signal calculated by the ABS actuator and
electric unit (control unit).

Combination meter

Vehicle speed signal

Receives the vehicle speed signal.

Odometer signal

Receives the odometer signal.

Reception unit

Signal name

Description

Category

Display function

Display content

AVA1251

JSNIA3466GB

AVA1251

Revision: November 2015

2016 JUKE

AV-206

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

SYSTEM

Voltmeter display characteristic

Boost Gauge

The boost gauge displays the boost level in 5 grades based on the

boost pressure signal received from ECM via CAN communication.

Boost gauge display characteristic

Instantaneous Fuel Consumption

The instantaneous fuel consumption gauge displays the instanta-

neous fuel consumption in 5 grades, which is calculated from the

fuel consumption monitor signal received from ECM via CAN com-

munication and the vehicle speed signal received from the combina-

tion meter via CAN communication.

JSNIA3467GB

AVA1257

JSNIA3469GB

AVA1305

Revision: November 2015

2016 JUKE

SYSTEM

AV-207

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

Fuel ECO display characteristic

G-Force

The G-FORCE gauge displays the decel G level and side G level in

3 grades respectively, which are calculated based on the decel G

sensor signal and side G sensor signal received from the ABS actu-

ator and electric unit (control unit) via CAN communication.

Drive Information

The travel time, average speed, and mileage are displayed as fol-

lows.

• Travel time: Displays the time calculated by the multi display unit.

• Average speed: Calculated from the odometer signal and vehicle

speed signal received from the combination meter via CAN com-

munication.

• Mileage: Calculated from the odometer signal and vehicle speed

signal received from the combination meter via CAN communica-

tion.

ECO Information

The fuel economy record is calculated from the fuel consumption

monitor signal received from ECM via CAN communication and the

vehicle speed signal received from the combination meter via CAN

communication.

Set Up

JSNIA3470GB

AVA1255

AVA1256

AVA1306

Revision: November 2015

2016 JUKE

AV-208

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

SYSTEM

The following items can be set.

• Display Brightness

• Button Brightness

• Select Language

• Select Units

• Clock Time Setting

• CLIMATE ECO

• Auto Interior Illumination

• Selective Door Unlock

• Auto Headlight Sensitivity

Display/operation restrictions

• To secure safety, some functions are not allowed for user operation during driving.

• The functions subject to the display/operation restriction are as follows.

Driving status judgment criterion

• The driving status is judged from the vehicle speed signal received from the combination meter via CAN

communication. The driving status is displayed on the multi display unit and operation restrictions are

applied as necessary.

AVA1263

Function

Condition

Control content

ECO information
(Fuel Economy Record)

Daily Reset, Weekly Reset, Re-
set at Start, and Manual Reset

Driving

Cannot be operated
(Reset, page scroll)

Daily Reset, and Weekly Reset

When no time is set

Fuel consumption history is not
displayed
(Warning message appears)

SET UP

Driving

• Item selection and setting are

not available

• No display

JSNIA3472GB

Revision: November 2015

2016 JUKE

HANDLING PRECAUTION

AV-209

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

HANDLING PRECAUTION

Integrated Control System

INFOID:0000000012202616

• The engine torque, engine power, boost, and instantaneous fuel consumption are provided for information

purposes only. They are not intended to prompt the driver to adjust driving style. The readings may be

slightly delayed relative to the actual vehicle behaviors. This is not a malfunction.

• The voltmeter reading cannot be used as an indicator for battery replacement because it indicates the input

voltage to the multi display unit, not the battery voltage.

• The SET UP screen are viewable and operable only while the vehicle is stopped.

• The ECO information screen is operable only while the vehicle is stopped.

• If no time setting is performed, the daily and weekly fuel consumption history data are not displayed.

• The readings may differ from the actual values depending on driving conditions.

Revision: November 2015

2016 JUKE

AV-210

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

CONSULT Function

INFOID:0000000012202617

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with multi display unit.

SELF DIAGNOSTIC RESULT

Refer to

AV-215, "DTC Index"

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this vehicle. For information (items) applicable

to this vehicle, refer to CONSULT display items.

Diagnosis mode

Description

Self Diagnostic Results

Displays malfunctioning systems stored in the multi display unit.

Data Monitor

Displays the multi display unit input/output data in real time.

Active Test

The multi display unit sends a drive signal to electronic components to check their operation.

CAN Diag Support Monitor

Displays CAN communication status.

Monitor item

Unit

Description

ECO SW

On / Off

Displays the ECO switch signal status sent via CAN communication.

NORMAL SW

On / Off

Displays the NORMAL switch signal status sent via CAN communication.

SPORTS SW

On / Off

Displays the SPORTS switch signal status sent via CAN communication.

BOOST PRESSURE

kPa

Displays the boost pressure signal value received from ECM via CAN com-
munication.

ENGINE SPEED

Tr/min

Displays the engine speed signal value received from ECM via CAN com-
munication.

ENGINE TORQUE

Displays the engine torque signal value received from ECM via CAN com-
munication.

BATTERY VOLTAGE

Displays the input voltage value.

FUEL CONSUMPTION

Displays the fuel consumption signal value received from ECM via CAN
communication.

VEHICLE SPEED

km/h

Displays the vehicle speed signal value received from the combination
meter via CAN communication.

LONG ACC

Displays the decel G signal received from ABS actuator and electric unit
(control unit) via CAN communication.

TRANCE ACC

Displays the side G signal received from ABS actuator and electric unit
(control unit) via CAN communication.

DIST TOTAL

Displays the mileage signal value received from the combination meter via
CAN communication.

POSI LIGHT REQ

On / Off

Displays the parking lamp signal value received from BCM via CAN com-
munication.

CLUSTER ILL REQ

On / Off

Displays the dimming signal value received from BCM via CAN communi-
cation.

ENGINE STATUS

STOP / STALL /

RUN / CRA

Displays the engine status signal value received from ECM via CAN com-
munication.

A/C SW

On / Off

Displays the A/C switch signal status sent via CAN communication.

AUTO SW

On / Off

Displays the AUTO switch signal status sent via CAN communication.

RR DEF SW

On / Off

Displays the RR DEF switch signal status sent via CAN communication.

FR DEF SW

On / Off

Displays the FR DEF switch signal status sent via CAN communication.

Revision: November 2015

2016 JUKE

DIAGNOSIS SYSTEM (MULTI DISPLAY UNIT)

AV-211

< SYSTEM DESCRIPTION >

[INTEGRATED CONTROL SYSTEM]

*: This is not used to determine ON/OFF of the indicator lamp.

ACTIVE TEST

Indicator

VENT SW1

On / Off

Displays the air outlet switch signal status sent via CAN communication.

VENT SW2

VENT / B/L / FOOT

/ D/F

Displays the air outlet switch signal status sent via CAN communication.

INTAKE SW

On / Off

Displays the air intake switch signal status sent via CAN communication.

INTAKE SW LONG PUSH

On / Off

Displays the air intake switch hold signal status sent via CAN communica-
tion.

OFF SW

On / Off

Displays the OFF switch signal status sent via CAN communication.

TEMP SW1

On / Off

Displays the temperature control dial signal status sent via CAN communi-
cation.

FAN SW1

On / Off

Displays the fan control dial signal status sent via CAN communication.

A/C SW IND

On / Off

Displays the A/C switch indicator signal value received from the A/C auto
amp. via CAN communication.

A/C INDICATOR

On / Off

Displays the A/C display signal value received from the A/C auto amp. via
CAN communication.

OFF INDICATOR

On / Off

Displays the OFF display signal value received from the A/C auto amp. via
CAN communication.

AIR VENT IND

Non-display / VENT

B/L / FOOT /

D/F / DEF

Displays the air outlet indicator signal value received from the A/C auto
amp. via CAN communication.

FR DEF SW IND

On / Off

Displays the RF DEF indicator signal value received from the A/C auto
amp. via CAN communication.

FRE SW IND

On / Off

Displays the FRE indicator signal value received from the A/C auto amp.
via CAN communication.

REC SW IND

On / Off

Displays the REC indicator signal value received from the A/C auto amp.
via CAN communication.

RR DEF SW IND

On / Off

Displays the RR DEF indicator signal value received from the IPDM E/R
via CAN communication.

AUTO IND

Off / Auto

Displays the AUTO indicator signal value received from the A/C auto amp.
via CAN communication.

TEMP IND

Displays the temperature setting unit signal value received from the A/C
auto amp. via CAN communication.

FAN IND

Off / speed

Displays the fan setting signal value received from the A/C auto amp. via
CAN communication.

Monitor item

Unit

Description

Test Item

Description

INDICATOR

The test activates the switch illuminations, display illuminations, and switch LEDs in the AIR CON
mode and D-MODES to see if they are functioning normally.

Test Item

Function

INDICATOR

The sequence below is repeated.
• All indicators remain ON for 5 seconds in AIR CON mode

⇔

All indicators remain ON for 5 seconds

in D-MODE.

Revision: November 2015

2016 JUKE

Content .. 25 26 27 28 ..