|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-29 < SYSTEM DESCRIPTION > C D E F G H I J K L B A O P N COMB SW COMB SW : CONSULT-III Function (BCM - COMB SW) INFOID:0000000005249318 DATA MONITOR TRUNK/GLASS HATCH This test is able to check back door opener actuator open operation. BLINKER This test is able to check security hazard lamp operation. HORN This test is able to check horn operation. P RANGE This test is able to check A/T shift selector power supply ENGINE SW ILLUMI This test is able to check push-ignition switch illumination operation. LOCK INDICATOR This test is able to check indicator in push-ignition switch operation. ACC INDICATOR This test is able to check indicator in push-ignition switch operation. IGNITION ON IND This test is able to check indicator in push-ignition switch operation. KEY SLOT ILLUMI This test is able to check key slot illumination operation. Test item Description Monitor item [UNIT] Description FR WIPER HI Displays the status of the FR WIPER HI switch in combination switch judged by BCM with the combination FR WIPER LOW Displays the status of the FR WIPER LOW switch in combination switch judged by BCM with the combination FR WASHER SW Displays the status of the FR WASHER switch in combination switch judged by BCM with the combination FR WIPER INT Displays the status of the FR WIPER INT switch in combination switch judged by BCM with the combination FR WIPER STOP Displays the status of the front wiper stop position signal received from IPDM E/R via CAN communication. INT VOLUME Displays the status of wiper intermittent dial position judged by BCM with the combination switch reading RR WIPER ON Displays the status of the RR WIPER ON switch in combination switch judged by BCM with the combination RR WIPER INT Displays the status of the RR WIPER INT switch in combination switch judged by BCM with the combination RR WASHER SW Displays the status of the RR WASHER switch in combination switch judged by BCM with the combination RR WIPER STOP Displays the status of the rear wiper stop position signal received from rear wiper motor. TURN SIGNAL R Displays the status of the TURN RH switch in combination switch judged by BCM with the combination switch TURN SIGNAL L Displays the status of the TURN LH switch in combination switch judged by BCM with the combination switch TAIL LAMP SW Displays the status of the TAIL LAMP switch in combination switch judged by BCM with the combination HI BEAM SW Displays the status of the HI BEAM switch in combination switch judged by BCM with the combination switch |