|
|
Content .. 1491 1492 1493 1494 ..
ENCODER PWC-33 < DTC/CIRCUIT DIAGNOSIS > [FRONT & REAR WINDOW ANTI-PINCH] C D E F G H I J L M A B PWC N O P Is the inspection result normal? YES >> Replace front power window switch (passenger side). Refer to PWC-137, "Removal and Installa- . NO >> Repair or replace harness. 6. CHECK GROUND CIRCUIT 2 1. Disconnect front power window switch (passenger side) connector. 2. Check continuity between front power window switch (passenger side) harness connector and front power Is the inspection result normal? YES >> Replace front power window switch (passenger side). Refer to PWC-137, "Removal and Installa- . NO >> Repair or replace harness. REAR LH REAR LH : Description INFOID:0000000005248184 Detects condition of the rear power window motor LH operation and transmits to rear power window switch LH REAR LH : Component Function Check INFOID:0000000005248185 1. CHECK ENCODER OPERATION Check that rear door LH glass performs AUTO open/close operation normally by power window main switch or Is the inspection result normal? YES >> Encoder operation is OK. NO >> Refer to PWC-33, "REAR LH : Diagnosis Procedure" . REAR LH : Diagnosis Procedure INFOID:0000000005248186 1. CHECK ENCODER SIGNAL 1. Turn ignition switch ON. 2. Check signal between rear power window switch LH harness connector and ground with oscilloscope. Front power window switch (passenger side) Ground Continuity Connector Terminal D38 4 Not existed Front power window switch (passenger side) Front power window motor (passenger side) Continuity Connector Terminal Connector Terminal D38 3 D40 6 Existed (+) (–) Signal (Reference value) Rear power window switch LH Connector Terminal D57 12 Ground Refer to following signal 15 |