|
|
Content .. 1371 1372 1373 1374 ..
MWI METER SYSTEM MWI-11 < SYSTEM DESCRIPTION > C D E F G H I J K L M B A O P METER SYSTEM : Component Description INFOID:0000000005524552 1. Fuel level sensor unit and fuel pump 2. BCM 3. IPDM E/R 4. ECM : (VQ35HR engine models) ECM : (VK50VE engine models) 5. Oil pressure switch (VQ35HR engine 6. Ambient sensor 7. Oil pressure switch (VK50VE engine 8. ABS actuator and electric unit (con- 9. Unified meter and A/C amp. 10. Combination meter 11. Fuel level sensor unit (sub) A. Rear seat (bottom) B. Dash side finisher (passenger side) C. Hoodledge cover (RH) D. 2WD [oil pan (upper) RH side] E. AWD [oil filter bracket part (VQ35HR F. Condenser (front) G. AWD [oil filter bracket part (VK50VE H. Hoodledge cover (LH) I. Behind cluster lid C Unit Description Combination meter Controls the following with the signals from the unified meter and A/C amp, switches and sensors. • Speedometer • Tachometer • Engine coolant temperature gauge • Fuel gauge • Warning lamps • Indicator lamps • Information display Unified meter and A/C amp. • The combination meter receives the necessary information from various units via CAN communi- cation line and transmits them to the unified meter and A/C amp. with the communication line that • Transmits the fuel gauge signal from the fuel gauge unit with the communication line that connects the unified meter and A/C amp. and the combination meter. • Reads the signals from the A/T shift selector and paddle shifter transmits them to TCM with CAN communication line. IPDM E/R IPDM E/R reads the ON/OFF signals of the oil pressure switch and transmits the oil pressure switch Fuel level sensor unit Oil pressure switch ECM Transmits the following signals to the unified meter and A/C amp. with CAN communication line. • Engine speed signal • Engine coolant temperature signal • Fuel consumption monitor signal ABS actuator and electric unit Transmits the vehicle speed signal to the unified meter and A/C amp. with CAN communication line. BCM • Transmits signals provided by various units to the unified meter and A/C amp. with CAN commu- nication line. • Transmits the security signal to the combination meter. A/T shift selector Transmits the following signals to the unified meter and A/C amp. • Manual mode signal • Non-manual mode signal • Manual mode shift up signal • Manual mode shift down signal Paddle shifter Transmits the paddle shifter up signal and paddle shifter down signal to the unified meter and A/C TCM Transmits shift position signal to the unified meter and A/C amp. Meter control switch Trip A/B reset switch Washer level switch Transmits the washer level signal to the combination meter. Parking brake switch |