Infiniti FX35, FX50 (S51). Manual - part 1262

IP-16

< REMOVAL AND INSTALLATION >

INSTRUMENT PANEL ASSEMBLY

• Remove skirt clips of steering column lower cover (2).

• Release data link connector (pawl) then remove it from instrument lower panel LH.
• Disconnect harness connectors and aspirator duct.

19. Remove front body side welt LH. Refer to 

INT-17, "Removal and Installation"

.

20. Remove instrument side finisher LH.

Pull back instrument side finisher LH (1).

21. Remove front pillar garnish LH. Refer to 

INT-17, "Removal and Installation"

.

22. Remove speaker grille LH.

• Remove speaker grille LH (1) fixing pawls with remover tool

(A).

• Pull up and back speaker grille LH (1).

23. Remove front squawker. Refer to 

AV-141, "Exploded View"

.

24. Remove steering wheel. Refer to 

ST-17, "Removal and Installation"

.

25. Remove steering column covers.

• Remove steering column mask (1) and then remove steering column cover fixing screws.

: Clip

JMJIA2008ZZ

: Clip

JMJIA1982ZZ

: Pawl

JMJIA1983ZZ

(A)

Column cover (with PADDLE SHIFTER)

(B)

Column cover (without PADDLE SHIFTER)

JMJIA1984ZZ

INSTRUMENT PANEL ASSEMBLY

IP-17

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

IP

N

O

P

• Remove skirt clips and pawls of cluster lid A (6).

• Pull up steering column upper cover (2), and then remove steering column upper cover.
• Remove steering column side cover RH (3) fixing pawls and then remove steering column side cover

RH. (with PADDLE SHIFTER)

• Pull the steering column side cover LH (4) to the left side. (with PADDLE SHIFTER)
• Disconnect ADP steering switch connector. (with ADP)
• Remove steering column lower cover (5) fixing screws.
• Pull down steering column lower cover and then remove steering column lower cover.

26. Remove combination switch. Refer to 

BCS-84, "Removal and Installation"

.

27. Remove paddle switch LH/RH (with PADDLE SHIFTER). Refer to 

TM-354, "Exploded View"

.

28. Remove cluster lid A.

• Pull back cluster lid A (1), and disengage pawls.
• Remove cluster lid A.

29. Remove combination meter. Refer to 

MWI-146, "Exploded View"

.

30. Disconnect harness connector (A).

31. Remove instrument harness (1) fixing clip (B).

32. Disconnect trip A/B reset switch (1) harness connector (A).

Refer to 

MWI-149, "Exploded View"

.

: Clip

: Pawl

JMJIA2009ZZ

: Pawl

JMJIA1985ZZ

JMJIA1986ZZ

JMJIA1987ZZ

IP-18

< REMOVAL AND INSTALLATION >

INSTRUMENT PANEL ASSEMBLY

33. Remove center speaker grille.

• Disengage center speaker grille (1) fixing clips and pawls with

remover tool (A).

• Pull up center speaker grille.

34. Remove center speaker. Refer to 

AV-340, "Exploded View"

.

35. Remove inside key antenna. Refer to 

DLK-281, "INSTRUMENT CENTER : Removal and Installation"

.

36. Remove cluster lid C.

• Remove cluster lid C (1) fixing screws (A).
• Pull down and back cluster lid C.
• Disconnect harness connectors.

37. Remove cluster lid D.

• Remove cluster lid D (1) fixing screws (A).
• Pull back cluster lid D.
• Disconnect harness connectors.

38. Remove display unit.

• Remove display unit (1) fixing screws (A).
• Pull toward the arrow direction.
• Disconnect harness connectors.

: Clip

: Pawl

JMJIA1988ZZ

: Pawl

JMJIA1989ZZ

: Pawl

JMJIA1990ZZ

JMJIA1991ZZ

INSTRUMENT PANEL ASSEMBLY

IP-19

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

IP

N

O

P

39. Remove AV control unit.

Refer to 

AV-136, "Exploded View"

.

• Remove AV control unit (1) fixing screws (A).
• Pull back AV control unit.
• Disconnect harness connectors.

40. Remove push button ignition switch. Refer to 

SEC-220, "Removal and Installation"

.

41. Remove front defroster grille LH. Refer to 

VTL-13, "FRONT DEFROSTER GRILLE : Removal and Instal-

lation"

.

42. Remove front defroster grille RH. Refer to 

VTL-13, "FRONT DEFROSTER GRILLE : Removal and Instal-

lation"

.

43. Remove glove box assembly.

• Open the glove box.
• Pull back glove box assembly (1).

• Remove damper pin (1) of left side.

44. Remove instrument lower cover RH.

• Pull downward, disengage pawls.
• Pull back instrument lower cover RH (1).
• Disconnect illumination lamp harness connector.

JMJIA1628ZZ

JMJIA1993ZZ

: Clip

JMJIA1994ZZ

: Pawl

JMJIA1995ZZ