Infiniti FX35, FX50 (S51). Manual - part 1061

 

  Index      Infiniti     Infiniti FX35, FX50 (S51) - service repair manual 2010 year

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  1059  1060  1061  1062   ..

 

 

Infiniti FX35, FX50 (S51). Manual - part 1061

 

 

EXL-240

< REMOVAL AND INSTALLATION >

[XENON TYPE]

REAR COMBINATION LAMP

REAR COMBINATION LAMP

Exploded View

INFOID:0000000005244819

REMOVAL

DISASSEMBLY

Removal and Installation

INFOID:0000000005244820

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Remove the rear combination lamp lower and upper finisher.

2.

Remove the rear combination lamp mounting bolts.

3.

Disconnect the rear combination lamp connector.

4.

Pull the rear combination lamp toward outside of the vehicle. Remove the rear combination lamp.

INSTALLATION

Install in the reverse order of removal.

1.

Rear combination lamp

2.

Rear combination lamp lower finisher 3.

Rear combination lamp upper finisher

JPMIA1113ZZ

1.

Rear turn signal lamp bulb

2.

Rear turn signal lamp bulb socket

3.

Rear side marker lamp bulb socket

4.

Rear side marker lamp bulb

JPMIA1114ZZ

REAR COMBINATION LAMP

EXL-241

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

Replacement

INFOID:0000000005244821

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

STOP/TAIL LAMP

Replacement integral with rear combination lamp assembly. Refer to 

EXL-240, "Exploded View"

.

REAR SIDE MARKER LAMP BULB

1.

Remove the rear combination lamp. Refer to 

EXL-240, "Exploded View"

.

2.

Rotate the rear side marker lamp bulb socket counterclockwise and unlock it.

3.

Remove the bulb from the rear side marker lamp bulb socket.

REAR TURN SIGNAL LAMP BULB

1.

Remove the rear combination lamp. Refer to 

EXL-240, "Exploded View"

.

2.

Rotate the rear turn signal lamp bulb socket counterclockwise and unlock it.

3.

Remove the bulb from the rear turn signal lamp bulb socket.

EXL-242

< REMOVAL AND INSTALLATION >

[XENON TYPE]

HIGH-MOUNTED STOP LAMP

HIGH-MOUNTED STOP LAMP

Exploded View

INFOID:0000000005244822

Removal and Installation

INFOID:0000000005244823

REMOVAL

1.

Remove the back door plate. Refer to 

INT-32, "Exploded View"

.

2.

Remove the high-mounted stop lamp mounting nuts.

3.

Disconnect the high-mounted stop lamp connector.

4.

Pull the high-mounted stop lamp toward rear of the vehicle. Remove the high-mounted stop lamp.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

Seal packing cannot be reused.

1.

Seal packing

2.

High-mounted stop lamp

Refer to 

GI-4, "Components"

 for symbols in the figure.

JPMIA1115ZZ

BACK-UP LAMP

EXL-243

< REMOVAL AND INSTALLATION >

[XENON TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

BACK-UP LAMP

Exploded View

INFOID:0000000005244824

Removal and Installation

INFOID:0000000005244825

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Remove the back door finisher inner. Refer to 

INT-32, "Exploded View"

.

2.

Remove the back-up lamp mounting nuts. 

3.

Disconnect the back-up lamp connector. And then remove the back-up lamp.

INSTALLATION

Install in the reverse order of removal.

CAUTION:

Seal packing cannot be reused.

Replacement

INFOID:0000000005244826

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

BACK-UP LAMP BULB

1.

Remove the back door finisher inner. Refer to 

INT-32, "Exploded View"

.

1.

Seal packing

2.

Back-up lamp

Refer to 

GI-4, "Components"

 for symbols in the figure.

JPMIA1116ZZ

 

 

 

 

 

 

 

Content   ..  1059  1060  1061  1062   ..