|
|
Content .. 1016 1017 1018 1019 ..
EXL-68 < DTC/CIRCUIT DIAGNOSIS > [XENON TYPE] HEADLAMP (HI) CIRCUIT Is the measurement value normal? YES >> GO TO 2. NO >> GO TO 3. 2. CHECK HEADLAMP (HI) OPEN CIRCUIT 1. Turn the ignition switch OFF. 2. Disconnect IPDM E/R connector. 3. Check continuity between the IPDM E/R harness connector and the front combination lamp harness con- Does continuity exist? YES >> GO TO 5. NO >> Repair the harnesses or connectors. 3. CHECK HEADLAMP (HI) FUSE 1. Turn the ignition switch OFF. 2. Check that the following fuses are not fusing. Is the fuse fusing? YES >> GO TO 4. NO >> Replace IPDM E/R. 4. CHECK FRONT COMBINATION LAMP (HI) SHORT CIRCUIT 1. Disconnect IPDM E/R connector. 2. Check continuity between the IPDM E/R harness connector terminal and the ground. Does continuity exist? YES >> Repair the harnesses or connectors. And then replace the fuse. NO >> Replace the fuse. (Replace IPDM E/R if the fuse is fusing again.) Terminals Test item Voltage (Approx.) (+) ( − ) IPDM E/R Ground EXTERNAL LAMPS Connector Terminal RH E8 89 Hi Battery Off 0 V LH 90 Hi Battery Off 0 V IPDM E/R Front combination lamp Continuity Connector Terminal Connector Terminal RH E8 89 E28 1 Existed LH 90 E58 1 Unit Location Fuse No. Capacity Headlamp HI (RH) IPDM E/R #55 10 A Headlamp HI (LH) IPDM E/R #54 10 A IPDM E/R Ground Continuity Connector Terminal RH E8 89 Not existed LH 90 |