|
|
Fig. 191: Checking For Continuity Between PCM Connector Terminals C4 & A8 Or A9 13. Clear the DTC with the HDS. 14. Start the engine in the P position. 15. Check the OBD STATUS in DTCs MENU for a pass/fail test of code P0976. Did the result indicate a pass? YES: The problem has been corrected. NO: Return to step 1 and recheck. DTC P0977: OPEN IN SHIFT SOLENOID VALVE B CIRCUIT 1. Clear the DTC with the HDS. 2. Test-drive the vehicle for several minutes in 1st, 2nd and 3rd gears in the D 3 position. NOTE: z Record all freeze data and review General Troubleshooting Information z This code is caused by an electrical circuit problem and cannot be caused
2004 Acura TSX 2004 AUTOMATIC TRANSMISSIONS Diagnosis - MCTA 5-Speed
|