|
|
Fig. 23: Measuring The Rivet Depth From The Clutch Disc Lining Surface To The Rivets Flywheel Inspection 1. Inspect the ring gear teeth for wear and damage. 2. Inspect the clutch disc mating surface on the flywheel for wear, cracks, and burning. 3. Measure the flywheel (A) runout using a dial indicator (B) through at least two full turns with the engine installed. Push against the flywheel each time you turn it to take up the crankshaft thrust washer
2004 Acura TSX 2004 CLUTCHES TSX
|