Acura TSX / Honda Accord CL. Manual - part 836

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  834  835  836  837   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 836

 

 

Fig. 45: Installing The Rear Mount Bracket 

11. Install the rear mount/base bracket (B).  

12. Install the NEW set ring (A) on the intermediate shaft (B). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 46: Installing The NEW Set Ring On The Intermediate Shaft 

13. Clean the areas where the intermediate shaft contacts the transmission (differential) with solvent or 

carburetor cleaner, and dry with compressed air. Then install the intermediate shaft (B), be sure not to 
allow dust or other foreign particles to enter the transmission.  

14. Install the new set ring on the left driveshaft.  

15. Clean the areas where the left driveshaft contacts the transmission (differential) with solvent or carburetor 

cleaner, and dry with compressed air. Then install the left driveshaft, be sure not to allow dust or other 
foreign particles to enter the transmission. Turn the steering knuckle fully outward, and slide the 
driveshaft into the differential until you feel its set ring fully engage the side gear.  

16. Slide the right driveshaft over the intermediate shaft splines until you feel the driveshaft fully engage the 

intermediate shaft set ring.  

17. Install the transmission lower mounts. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 47: Installing The Transmission Lower Mounts 

18. Support the front subframe (A) with the special tool and a jack, and lift it up to body. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

Fig. 48: Support The Front Subframe With The Special Tool & A Jack & Lifting It Up To Body 

19. Slide the steering gearbox (A) in the gearbox mounting bracket (B) on the subframe. Apply a soap and 

water solution to the steering gearbox bushing (C) surfaces upper and lower. If you don't apply a soap and 
water solution to the bushing surfaces, the gearbox bushing will be damaged when installing the 
subframe. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS Removal & Installation - TSX

  

 

 

 

 

 

 

 

 

Content   ..  834  835  836  837   ..