|
|
1. Remove the bearing outer race (A), 76.2 mm thrust washer (B), and 76 mm thrust shim (C) from the transmission housing (D) by heating the housing to about 212°F (100°C) with heat gun (E). Do not heat z Do not use the thrust shim on the torque converter housing. z Adjust bearing preload after replacing the bearing and outer race. z Coat all parts with ATF during installation. NOTE: Let the transmission housing cool to room temperature before installing
2004 Acura TSX 2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX
|