Acura TSX / Honda Accord CL. Manual - part 811

Fig. 139: Installing The Detent Arm With Arm Collar On The Servo Body, And Install The New 
Lock Washer By Aligning Its Cutout With The Projection Of The Servo Body 

7. Install the control shaft (A) in the torque converter housing aligning the manual valve lever pin (B) on the 

control shaft with the guide of the manual valve (C). Pull the manual valve gently when aligning the 
manual valve with the control shaft. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 140: Installing The Control Shaft In The Torque Converter Housing Aligning The Manual 
Valve Lever Pin On The Control Shaft With The Guide Of The Manual Valve 

8. Hook the detent arm spring (A) to the detent arm (B). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 141: Hooking The Detent Arm Spring To The Detent Arm 

9. Turn the shift fork shaft (A) so the large chamfered hole (B) is facing the fork bolt hole (C) of the shift 

fork (D). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 142: Turning The Shift Fork Shaft So The Large Chamfered Hole Is Facing The Fork Bolt 
Hole Of The Shift Fork 

10. Install the shift fork and reverse selector together on the shift fork shaft and countershaft. Secure the shift 

fork to the shift fork shaft with the lock bolt and a new lock washer (E), then bend the lock tab of the lock 
washer against the bolt head.  

11. Install the needle bearing and countershaft reverse gear on the countershaft.  

12. Install the reverse idler gear in the transmission housing (see REVERSE IDLER GEAR REMOVAL 

AND INSTALLATION ).  

13. Install the idler gear shaft (see IDLER GEAR SHAFT REMOVAL AND INSTALLATION ), if it was 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX