Acura TSX / Honda Accord CL. Manual - part 796

Fig. 83: Installing The Idler Gear Shaft In The Idler Gear 

5. Install the snap ring.  

CLUTCH DISASSEMBLY 

Special Tools Required 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

z

Clutch spring compressor attachment 07LAE-PX40100  

z

Clutch spring compressor attachment 07HAE-PL50101  

z

Clutch spring compressor bolt assembly 07GAE-PG40200 or 07GAE-PG4020A  

1. Remove the snap ring with a screwdriver. 

Fig. 84: Removing The Snap Ring With A Screwdriver 

2. Remove the clutch end plate (A), clutch discs (5) (B), clutch flat-plates (5) (C), and waved spring (D) 

from the 3rd clutch drum (E). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 85: Removing The Clutch End Plate, Clutch Discs (5), Clutch Flat-Plates (5), And Waved 
Spring From The 3rd Clutch Drum 

3. Remove the clutch end plate (A), clutch discs (5) (B), clutch waved-plates (3) (C), 2.0 mm-thick flat plate 

(D), 4.0 mm-thick plate (E), and waved spring (F) from the 2nd clutch drum (G). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 86: Removing The Clutch End Plate, Clutch Discs (5), Clutch Waved-Plates (3), 2.0 mm-Thick 
Flat Plate, 4.0 mm-Thick Plate, And Waved Spring From The 2nd Clutch Drum 

4. Make a reference mark on 2.0 mm-thick flat-plate (D).  

5. Remove the clutch end plate (A), clutch discs (B) (5), clutch flat-plates (C) (5), and waved spring (D) 

from the 3rd clutch drum (E). 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX