Acura TSX / Honda Accord CL. Manual - part 776

Fig. 11: Removing The Oil Seal From The End Cover 

2. Install the new oil seal flush to the end cover with the special tools. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 12: Installing The New Oil Seal Flush To The End Cover 

CONTROL SHAFT BEARING REPLACEMENT 

Special Tools Required 

z

Driver 07749-0010000  

z

Attachment, 22 x 24 mm 07746-0010800  

1. Remove the oil seal from the end cover, then remove the bearing. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 13: Removing The Oil Seal From The End Cover, Then The Bearing 

2. Install the new bearing flush to the end cover with the special tools. 

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX

  

 

Fig. 14: Installing The New Bearing Flush To The End Cover 

3. Install the new oil seal.  

ATF FEED PIPE REPLACEMENT 

1. Remove the snap rings (A), ATF feed pipes (B), and feed pipe flanges (C) from the end cover (D). 

NOTE:

Replace the end cover, if the 1st clutch ATF feed pipe (E) replacement is 
required.

 

2004 Acura TSX 

2004 AUTOMATIC TRANSMISSIONS A/T Overhaul (MCTA) - TSX