Acura TSX / Honda Accord CL. Manual - part 722

Fig. 41: Removing The Steering Wheel Bolt & Steering Wheel From The Steering Column 

STEERING WHEEL DISASSEMBLY/REASSEMBLY

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 42: Exploded View Of Steering Wheel Components 

STEERING WHEEL INSTALLATION 

1. Before installing the steering wheel, make sure the front wheels are aligned straight ahead, then center the 

cable reel (A). Do this by first rotating the cable reel clockwise until it stops. Then rotate it 
counterclockwise about three full turns. The arrow mark (B) on the cable reel label point should point 
straight up. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 43: Centering The Cable Reel 

2. Position the two tabs (A) of the turn signal cancelling sleeve (B) as shown. Install the steering wheel on 

to the steering column shaft, making sure the steering wheel hub (C) engages the pins (D) of the cable 
reel and tabs of the cancelling sleeve. Do not tap on the steering wheel or steering column shaft when 
installing the steering wheel. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 44: Positioning The Two Tabs Of The Turn Signal Cancelling Sleeve 

3. Install the steering wheel bolt (A) and tighten it to the specified torque. Connect the audio remote, 

navigation guide and cruise control set/resume switch connectors (if equipped). Make sure the wire 
harness is routed and fastened properly. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX