Acura TSX / Honda Accord CL. Manual - part 675

Fig. 112: Removing The Dust & Pollen Filter Assembly From The Evaporator 

3. Remove the filter (A) from the housing (B), and replace the filter. 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 113: Removing The Filter From The Housing & Replacing The Filter 

4. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the 

evaporator.  

BLOWER UNIT REMOVAL & INSTALLATION 

1. Remove the glove box and the passenger's kick panel (see GLOVE BOX 

REMOVAL/INSTALLATION ).  

2. Remove the wire harness connector clips (A), the wire harness clip (B), and bolt. Cut the plastic cross 

brace (C) in the glove box opening with diagonal cutters in the area shown. 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 114: Cutting The Plastic Cross Brace In The Glove Box Opening 

3. Disconnect the connectors (A) from the blower motor, the floor wire harness, and the recirculation 

control motor, then remove the wire farness clips (B) and the connector clips (C). Remove the mounting 
nuts, the mounting bolts and the blower unit (D). 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX

  

 

Fig. 115: Removing Blower Unit 

4. Install the unit in the reverse order of removal. Make sure that there is no air leakage.  

BLOWER UNIT COMPONENT REPLACEMENT 

Note these items when overhauling the blower unit:  

z

The recirculation control motor (A), the blower motor (B), and the dust and pollen filter (C) can be 
replaced without removing the blower unit.  

z

Before reassembly, make sure that the recirculation control linkage and doors move smoothly without 
binding.  

z

After reassembly, make sure the recirculation control motor runs smoothly (see RECIRCULATION 

 

2004 Acura TSX 

2004 AUTOMATIC A/C SYSTEMS Climate Control System - TSX