Acura TSX / Honda Accord CL. Manual - part 602

Fig. 45: Measuring Voltage Between Ignition Coil 3P Connector Terminal No. 3 & Body 
Ground 

32. Turn the ignition switch OFF.  

33. Check for continuity between ignition coil 3P connector terminal No. 2 and body ground. 

Is there continuity? 

YES: Go to step 34.  

NO: Repair open in the wire between the ignition coil and G 101, then go to step 63 . 

 

2004 Acura TSX 

2004 ENGINE PERFORMANCE PGM-FI System - TSX

  

 

Fig. 46: Checking For Continuity Between Ignition Coil 3P Connector Terminal No. 2 & 
Body Ground 

34. Turn the ignition switch OFF.  

35. Jump the SCS line with the HDS.  

36. Disconnect ECM/PCM connector A (31P).  

37. Check for continuity between body ground and the appropriate ECM/PCM connector terminal (see Fig. 

47 and Fig. 48 ). 

 

2004 Acura TSX 

2004 ENGINE PERFORMANCE PGM-FI System - TSX

  

 

Is there continuity? 

YES: Repair short in the wire between the ECM/PCM and the ignition coil, then go to step 
63 .  

NO: Go to step 63 .  

Fig. 47: Checking For Continuity Between Body Ground & The Appropriate ECM/PCM 
Connector Terminals 

 

2004 Acura TSX 

2004 ENGINE PERFORMANCE PGM-FI System - TSX

  

 

Fig. 48: DTC/Terminal Identification Table 

38. Connect the appropriate ignition coil 3P connector terminal No. 1 to body ground with a jumper wire (see 

Fig. 49 and Fig. 50 ). 

 

2004 Acura TSX 

2004 ENGINE PERFORMANCE PGM-FI System - TSX