Acura TSX / Honda Accord CL. Manual - part 449

2. The main journal codes are stamped on the crankshaft. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 187: Locating Main Journal Codes

3. Use the crank bore codes and crank journal codes to select the appropriate replacement bearings from the 

following table. See Fig. 188 . 

Fig. 188: Replacement Bearings Color Code Table

NOTE:

z

The color code is on the edge of the bearing.  

z

When using bearing halves of different colors, it does not matter 
which color is used in the top or bottom.  

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

CONNECTING ROD BEARING REPLACEMENT

Rod Bearing Clearance Inspection 

1. Remove the oil pump (see OIL PUMP REMOVAL ).  

2. Remove the baffle plates (see step 6 of CRANKSHAFT & PISTON REMOVAL ).  

3. Remove the connecting rod cap and bearing half.  

4. Clean the crankshaft rod journal and bearing half with a clean shop towel.  

5. Place plastigage across the rod journal.  

6. Reinstall the bearing half and cap, and torque the bolts to 36 N.m (3.7 kgf.m, 27 lbf.ft) + 120° 

7. Remove the rod cap and bearing half, and measure the widest part of the plastigage. 

Connecting Rod Bearing-To-Journal Oil Clearance: 

Standard (New): 0.032-0.066 mm (0.0013-0.0026 in.)  

Service Limit: 0.077 mm (0.0030 in.)  

Fig. 189: Measuring The Widest Part Of The Plastigage

NOTE:

Do not rotate the crankshaft during inspection.

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX