Acura TSX / Honda Accord CL. Manual - part 442

Fig. 158: Installing Camshafts & Holders 

7. Set the camshaft holders (B) and cam chain guide B (C) in place.  

8. Tighten the bolts in sequence to the specified torque. 

Specified Torque: 

8 mm bolts: 22 N.m (2.2 kgf.m, 16 lbf.ft)  

6 mm bolts: 12 N.m (1.2 kgf.m, 8.7 lbf.ft)  

6 mm bolts: Locations 21, 22, 23 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 159: Camshaft Holder Bolt Torque Tightening Sequence 

9. Install the cam chain (see CAM CHAIN INSTALLATION ), and adjust the valve clearance (see 

VALVE CLEARANCE ADJUSTMENT ).  

CYLINDER HEAD INSTALLATION 

Install the cylinder head in the reverse order of removal. 

1. Install the NEW coolant separator in the cylinder block, when replacing the cylinder block. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 160: Installing NEW Coolant Separator In The Cylinder Block 

2. Clean the cylinder head and block surface. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

3. Install a NEW cylinder head gasket (A) and dowel pins (B) on the cylinder block. Always use a NEW 

cylinder head gasket. 

Fig. 161: Installing NEW Cylinder Head Gasket & Dowel Pins On The Cylinder Block 

4. Set the crankshaft to top dead center (TDC). Align the TDC mark (A) on the crankshaft sprocket with the 

pointer (B) on the cylinder block. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX