Acura TSX / Honda Accord CL. Manual - part 428

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  426  427  428  429   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 428

 

 

Fig. 103: Removing The CKP Pulse Plate

13. Install the CKP pulse plate.  

14. Check the chain case oil seal for damage. If the oil seal is damaged, replace the chain case oil seal (see 

CHAIN CASE OIL SEAL INSTALLATION ).  

15. Remove old liquid gasket from the chain case mating surfaces, bolt and bolt holes.  

16. Clean and dry the chain case mating surfaces.  

17. Apply liquid gasket, P/N 08718-0009, evenly to the cylinder block mating surface of the chain case and 

to the inner threads of the holes (see step 12 of Cam Chain Installation ).  

18. Apply liquid gasket to the cylinder block upper surface contract areas on the chain case (see step 13 of 

Cam Chain Installation ).  

19. Apply liquid gasket, P/N 08718-0009, evenly to the oil pan mating surface of the chain case and to the 

inner threads of the holes (see step 14 of Cam Chain Installation ). 

20. Install the NEW O-ring on the chain case. Set the edge of the chain case to the edge of the oil pan, then 

install the chain case on the cylinder block (see step 15 of Cam Chain Installation ). 

21. Install the side engine mount bracket (see step 16 of Cam Chain Installation ).  

22. Install the upper bracket and the ground cable (see step 17 of Cam Chain Installation ).  

23. Install the VTC oil control solenoid valve (see VTC OIL CONTROL SOLENOID VALVE 

REMOVAL/TEST/INSTALLATION ).  

24. Connect the CKP sensor connector and VTC oil control solenoid valve connector (see step 20 of Cam 

Chain Installation ).  

25. Install the crankshaft pulley (see INSTALLATION ).  

26. Install the cylinder head cover (see CYLINDER HEAD COVER INSTALLATION ).  

27. Install the drive belt.  

28. Install the splash shield (see step 25 of TRANSMISSION INSTALLATION ).  

29. Install the front tires/wheels.  

30. Perform the CKP pattern clear/CKP learn procedure (see CKP PATTERN CLEAR/CKP PATTERN 

LEARN PROCEDURE ).  

CYLINDER HEAD COVER REMOVAL 

1. Remove the intake manifold cover. 

NOTE:

Do not install the parts if 4 minutes or more have elapsed since applying 
liquid gasket. Instead, reapply liquid gasket after removing the old residue.

NOTE:

When installing the chain case, do not slide the bottom surface on the oil 
pan mounting surface.

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 104: Removing The Intake Manifold Cover 

2. Remove the four ignition coils (see IGNITION COIL REMOVAL/INSTALLATION ). 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

3. Remove the two bolts (A) securing the vacuum line. 

Fig. 105: Removing Bolts & Components 

4. Remove the bolt (B) securing the power steering hose bracket.  

5. Remove the dipstick (C) and breather hose (D).  

6. Remove the cylinder head cover.  

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

 

 

 

 

 

 

 

Content   ..  426  427  428  429   ..