Acura TSX / Honda Accord CL. Manual - part 409

Fig. 30: Installing Exhaust Pipe A 

14. Install the shift control cable (A/T) (see step 31 of TRANSMISSION INSTALLATION ).  

15. Install a NEW set ring on the end of each driveshaft, then install the driveshafts. Make sure each ring 

"clicks" into place in the differential and intermediate shaft.  

16. Connect the suspension lower arm ball joints (see step 12 of KNUCKLE/HUB/WHEEL BEARING ).  

17. Install the damper fork (see step 3 of LOWER ARM ).  

18. Connect the stabilizer links (see STABILIZER LINK ).  

19. Install the splash shield (see step 25 of TRANSMISSION INSTALLATION ).  

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

20. Lower and remove the chain hoist from the engine.  

21. Check the quick connector (A) and set ring (B) for cracks or damage. If the connector and/or set ring are 

cracked or damaged, replace the connector. 

Fig. 31: Checking The Quick Connector And Set Ring 

22. Make sure the set ring (B) is in place inside the quick connector. If the set ring is off the connector, 

replace the quick connector.  

23. Replace the O-ring (C) in the quick connector.  

24. Check the lock (D). If the lock is damaged or deformed, replace it. When installing the NEW lock to the 

connector, slide it straight down along the groove.  

25. Clean the connecting surface of the radiator (E), then apply clean engine coolant around the connecting 

surface.  

26. Push down the lock (A), then push the quick connector (B) onto the radiator until you hear it click. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 32: Pushing The Quick Connector Onto The Radiator 

27. Install the upper radiator hose (A) and heater hoses (B). 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX

  

 

Fig. 33: Installing The Upper Radiator Hose & Heater Hoses 

28. Install the automatic transmission fluid (ATF) cooler hoses (A/T).  

29. Install the A/C compressor. 

 

2004 Acura TSX 

2004 ENGINES 2.4L DOHC VTEC - TSX