|
|
Fig. 24: Identifying Planetary Gear Inspection Reassembly 1. Install the brush into the brush holder, and set the armature (A) in the brush holder (B). See Fig. 25 . 2. While squeezing a spring (C), insert it in the hole on the brush holder, and push it until it bottoms. Repeat this for the other springs (D,E and F). NOTE: To seat the new brushes, slip a strip of #500 or #600 sandpaper, with the NOTE: Ensure the armature stays in the holder.
2004 Acura TSX 2004 STARTING & CHARGING SYSTEMS Starter - TSX
|