Acura TSX / Honda Accord CL. Manual - part 324
10. Remove the front bearing retainer plate. See Fig. 23 .
11. Drive out the front bearing with a brass drift and hammer. See Fig. 24 .
12. With a hammer, driver and attachment, install a new front bearing in the drive-end housing. See Fig. 25 .
Fig. 17: Removing Drive-End Housing Pulley Locknut
Courtesy of AMERICAN HONDA MOTOR CO., INC.
2004 Acura TSX
2004 STARTING & CHARGING SYSTEMS Generators & Regulators - TSX