|
|
Fig. 29: Checking For Continuity Between Body Ground & The Appropriate Wheel Sensor + 6. Disconnect the appropriate wheel sensor 2P connector. 7. Check for continuity between body ground and the appropriate wheel sensor + B and GND terminals of the VSA control unit 47P connector individually (see Fig. 30 and Fig. 31 ). Is there continuity? YES: Repair short to body ground in the wire between the VSA modulator-control unit and NO: Replace the appropriate wheel sensor (see WHEEL SENSOR REPLACEMENT ).
2004 Acura TSX 2004 BRAKES Vehicle Stability Assist System - TSX
|