|
|
9 . When the motor stops running, disconnect one lead immediately. Fig. 9: Driver's Window Motor Test Table 4. If the motor does not run or fails to run smoothly, replace it. Pulser Test: 5. Reconnect the 6P connector to the window motor. 6. Check for voltage between the terminals. z There should be battery voltage between the No. 6 (+) and No. 5 (-) terminals when the ignition z Connect an analog voltmeter between the No. 2 (+) and No. 5 (-) terminals, and run the window z Connect an analog voltmeter between the No. 3 (+) and No. 5 (-) terminals, and run the window If the voltage is not as specified, replace the driver's window motor. PASSENGER'S WINDOW MOTOR TEST 1. Remove the passenger's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION and/or REAR DOOR PANEL REMOVAL/INSTALLATION ). 2. Disconnect the 6P connector from the window motor.
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Power Windows - TSX
|