Acura TSX / Honda Accord CL. Manual - part 242

Fig. 20: Installing The New Actuator Terminals Into The Connector (Left) 

Fig. 21: Installing The New Actuator Terminals Into The Connector (Right) 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX

  

 

10. Cover the harness hole with a tape (A). 

Fig. 22: Covering The Harness Hole With Tape

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX

  

 

11. Install the clip (B).  

12. Reinstall the mirror assembly to the door.  

13. Operate the power mirror to ensure smooth operation.  

AUTOMATIC DIMMING INSIDE MIRROR 

DESCRIPTION 

The automatic dimming inside mirror has a front-facing lux level sensor (A), a rear-facing lux level sensor (B), 
and a control unit. The control unit receives signals from each sensor. Based on the difference between the two 
lux levels (the light outside the vehicle and the light from the headlights of the other vehicle, etc.), the control 
unit controls the electro-chromic gel to reduce the glare. This dimming function is canceled when the 
transmission is in reverse, or when the automatic dimming off switch (C) is turned OFF. 

Fig. 23: Locating Front-Facing Lux Level Sensor

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX

  

 

Fig. 24: Locating Rear-Facing Lux Level Sensor & Automatic Dimming Off Switch 

CIRCUIT DIAGRAM 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Mirrors & Automatic Dimming Inside Mirror - TSX