Acura TSX / Honda Accord CL. Manual - part 229

REAR SEAT ARMREST REPLACEMENT

1. Remove the clip (A) from the left portion of the armrest pivot. 

Fig. 36: Removing The Clip From The Left Portion Of The Armrest Pivot 

2. Remove the armrest. 

a. Slide the armrest (A) toward the driver's side of the vehicle.  

b. Remove the pivot shaft (B) from the collar (C) on the passenger's side of the vehicle by pulling up 

on the armrest, and remove the pivot shaft (B) from the collar (D) by pulling up on the armrest. 

NOTE:

Take care not to tear the seams or damage the seat covers.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 37: Removing The Armrest 

3. Remove the beverage holder. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 38: Removing The Beverage Holder

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

4. Install the armrest in the reverse order of removal.  

REAR SEAT-BACK COVER REPLACEMENT 

1. Remove the seat-back (see REAR SEAT REMOVAL/INSTALLATION ).  

2. Remove these items: 

a. Armrest (see REAR SEAT ARMREST REPLACEMENT )  

b. Headrest  

3. Left seat-back: Remove the screws, then remove the center belt guide. 

NOTE:

z

Take care not to tear the seams or damage the seat covers. 

z

Put on gloves to protect your hands.  

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX