Acura TSX / Honda Accord CL. Manual - part 228

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  226  227  228  229   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 228

 

 

upholstery ring pliers (B).  

Fig. 32: Seat Cushion Cover Installation Points 

REAR SEAT REMOVAL/INSTALLATION 

1. Remove the rear seat as shown.  

2. Install the seat in the reverse order of removal, and note these items: 

z

Before attaching the rear seat-back and cushion, make sure there are no twists or kinks in the rear 
seat belts and center seat belt.  

z

When installing the seat cushion, slip the seat belt buckles through the slits in the seat cushion. 

NOTE:

Take care not to scratch the body or tear the seat covers.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

z

Make sure the seat-back locks securely.  

Fig. 33: Removing The Rear Seat 

REAR SEAT-BACK LATCH REPLACEMENT 

1. Remove these items: 

a. Seat side bolster, both sides (see REAR SEAT REMOVAL/INSTALLATION )  

b. Rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA )  

2. Disconnect the cylinder rod (A), remove the bolts, then remove the seat-back latch (B). 

NOTE:

z

When prying with a flat-tip screwdriver, wrap it with protective tape to 
prevent damage.  

z

Take care not to bend or scratch the interior trim.  

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 34: Removing The Seat-Back Latch 

3. Install the latch in the reverse order of removal, and note these items: 

z

Make sure the cylinder rod is connected securely.  

z

Make sure the seat-back locks securely and unlocks properly.  

REAR SEAT-BACK LOCK CYLINDER REPLACEMENT 

1. Remove the rear shelf (see TRIM REMOVAL/INSTALLATION - REAR SHELF AREA ).  

2. Disconnect the cylinder rods from both seat-back latches (see REAR SEAT-BACK LATCH 

NOTE:

Take care not to scratch the interior trim.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

REPLACEMENT ).  

3. Remove the self-tapping ET screws, then remove the seat-back lock cylinder (A) and cylinder rods (B). 

Fig. 35: Removing The Seat-Back Lock Cylinder & Cylinder Rods 

4. Install the lock cylinder in the reverse order of removal, and note these items: 

z

Make sure the cylinder rod is connected securely.  

z

Make sure the seat-back unlocks properly. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

 

 

 

 

 

 

 

Content   ..  226  227  228  229   ..