Acura TSX / Honda Accord CL. Manual - part 223

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  221  222  223  224   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 223

 

 

z

Make sure the cable is connected securely.  

z

To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly 
over the pad before securing the hook strips.  

z

Replace the back panel clips as new ones.  

FRONT SEAT COVER REPLACEMENT 

SRS components are located in this area. Review the SRS component locations, and the precautions and 
procedures in the SRS section before performing repairs or service. See AIR BAG RESTRAINT SYSTEMS . 

Seat-back Cover 

1. Remove the front seat (see FRONT SEAT REMOVAL/INSTALLATION ).  

2. Remove the headrest.  

3. From under the seat cushion, disconnect the recline motor connector (A), and the seat-back heater 

connector (B) on the 8-way power seat. Detach the side airbag connector clip (C), OPDS unit connector 
clip (D) on the manual seat, and harness clips (E). Release the clips (F) (manual seat) and seat cushion 
cover (G) from the seat cushion frame spring (H), then pull the cover back, and remove the clamps (I). 

NOTE:

z

Take care not to tear the seams or damage the seat covers. 

z

Put on gloves to protect your hands.  

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 15: Detaching The Harness Clip & Disconnecting The Seat Connectors (Manual Seat)

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 16: Detaching The Harness Clip & Disconnecting The Seat Connectors (8-Way Power Seat) 

4. Remove these items from the front seat, then remove the seat cushion, manual seat (see FRONT SEAT 

DISASSEMBLY/REASSEMBLY - MANUAL ), 8-way power seat (see FRONT SEAT 
DISASSEMBLY/REASSEMBLY - 8-WAY POWER
 ): 

a. Recline cover  

b. Center cover  

c. Front cover  

5. 8-way power seat: Remove the clip (A), then remove the lumbar support handle (B). 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

Fig. 17: Removing The Clip & The Lumbar Support Handle (8-Way Power Seat) 

6. Detach the clips and hooks (A) by pulling the bottom of the back panel (B) back, then pull the panel 

downward to release the hooks (C) from the seat back frame, and remove the panel. 8-way power seat is 
shown; Manual seat is similar. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Power Heated Seats - TSX

  

 

 

 

 

 

 

 

 

Content   ..  221  222  223  224   ..