Acura TSX / Honda Accord CL. Manual - part 214

Fig. 119: Installing The NEW Boot Bands 

86. Close the ear portion (A) of the band (B) with commercially available pincers, Oetiker 1098 or equivalent 

(C). 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 120: Closing The Ear Portion Of The Band 

87. Slide the rack right and left to be certain that the boots are not deformed or twisted.  

STEERING GEARBOX INSTALLATION

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

1. Before installing the steering gearbox, make sure that no power steering fluid is on the mating surface of 

the gearbox and a front suspension subframe. To prevent the gearbox mounting bolts from loosening after 
the installation, remove the power steering fluid from the mount cushions and bolt holes.  

2. Apply a mild soap and water solution to both side of the mount cushion mating surfaces (A). 

Fig. 121: Apply A Mild Soap & Water Solution To Both Sides Of The Mount Cushion Mating 
Surfaces & Pass The Steering Gearbox Through The Wheelwell Opening On The Driver's Side 

3. Pass the cylinder of the steering gearbox (B) through the wheelwell opening on the driver's side.  

4. Carefully move the steering gearbox toward the passenger's side until the pinion shaft clears the 

wheelwell opening on the body.  

5. Rotate the steering gearbox so the pinion shaft (A) points upward. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 122: Rotating The Steering Gearbox So The Pinion Shaft Points Upward 

6. Continue moving the gearbox toward the passenger's side until the steering gearbox is in position. Make 

sure the power steering return line and feed line are routed above the gearbox.  

7. Remove the vinyl tape from the pinion shaft, and install the pinion shaft grommet (A). Align the slot in 

the pinion shaft grommet with the lug portion (B) on the valve housing. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX