Acura TSX / Honda Accord CL. Manual - part 200

Fig. 65: Removing The Steering Gearbox Mounting Bolts 

19. Remove the two flange bolts from the right side of the gearbox, then remove the gearbox mounting 

bracket (A) and cushion (B). 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 66: Removing The Two Flange Bolts 

20. Move the steering gearbox toward the front, and remove the pinion shaft grommet (A) from the top of the 

valve body unit. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 67: Removing The Pinion Shaft Grommet

21. Apply vinyl tape (B) to the splines on the pinion shaft.  

22. Apply vinyl tape or equivalent material (A) to the brake lines to protect them from the pinion shaft. 

Fig. 68: Applying Vinyl Tape To The Brake Lines 

23. Move the steering gearbox to the driver's side, and rotate it so the pinion shaft points toward the front of 

the vehicle.  

24. Carefully move the steering gearbox as an assembly toward the driver's side of the vehicle until the pinion 

shaft clears the wheelwell opening. Be careful not to damage the brake lines with the pinion shaft. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX