|
|
Fig. 38: Installing The Pulley 47. Hold the pulley with the special tool, and tighten the pulley nut to specified torque. 48. Check that the pump turns smoothly by turning the pulley. If it turns hard, loosen the four flange bolts on the cover, then retightening them in the same manner as in the step 35 . Turning the pump again by hand. STEERING WHEEL REMOVAL SRS components are located in this area. Review the SRS component locations and precautions and procedures 1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's radio station presets. 2. Align the front wheels straight ahead, then remove the driver's airbag from the steering wheel (see AIR BAG RESTRAINT SYSTEMS ).
2004 Acura TSX 2004 STEERING Power Steering System - TSX
|