Acura TSX / Honda Accord CL. Manual - part 192

Fig. 34: Pushing In The Cam Ring From The Pump Housing Cap Hole 

37. Install the pump preload spring (A) in the pump housing. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 35: Installing The Pump Preload Spring In The Pump Housing 

38. Coat the NEW 12.7 mm O-ring (B) with power steering fluid, and install it on the pump housing cap (C). 

39. Install the pump housing cap on the pump housing, and tighten it to specified torque.  

40. Install the pressure control valve spring (A) in the pump housing. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 36: Installing The Pressure Control Valve Spring In The Pump Housing 

41. Coat the pressure control valve (B) with power steering fluid, and install it on the pump housing.  

42. Coat the NEW 16.7 mm O-ring (C) with power steering fluid, and install it on the pressure control valve 

cap (D).  

43. Install the pressure control valve cap on the pump housing, and tighten it to the specified torque.  

44. Coat the NEW O-ring (A) with power steering fluid, and install it on the inlet joint (B). 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 37: Installing The Inlet Joint On The Pump Housing 

45. Install the inlet joint on the pump housing.  

46. Install the pulley (A), then loosely install the pulley nut (B). Hold the steering pump in a vise with soft 

jaws (C). Be careful not to damage the pump housing with the jaws of the vise. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX