Acura TSX / Honda Accord CL. Manual - part 189

 

  Index      Acura     Acura TSX 2004-2008 / Honda Accord CL 2006-2008 - service repair manual

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  187  188  189  190   ..

 

 

Acura TSX / Honda Accord CL. Manual - part 189

 

 

Fig. 22: Checking Pressure Control Valve 

18. Inspect the ball bearing by rotating the outer race slowly. If you feel any play (axial or radial) or 

roughness, remove the faulty ball bearing (A), and install a NEW one (B). 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 23: Replacing The Ball Bearing 

19. Inspect each part shown with an asterisk in the Exploded View; if any of them are worn or damaged, 

replace the pump as an assembly. 

Reassembly 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

20. Install the NEW pump seal (A) (with its grooved side facing in) into the pump housing (B) by hand first, 

then drive it in using the special tools with until there is no step at the top of the pump seal, and the seal is 
fully seated in the pump housing. 

Fig. 24: Installing The NEW Pump Seal 

21. Position the pump drive shaft (A) in the pump housing, then press it in with the appropriate size socket 

wrench (B) as shown. Do not apply more than 1,370 N (140 kgf, 308 lbf) of pressure. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

Fig. 25: Pressing Pump Drive Shaft Into The Pump Housing 

22. Install the 40 mm snap ring (C) with its radiused edge facing out.  

23. Coat the NEW 23.8 mm O-ring (A) with the power steering fluid, then position it on the bottom (B) of 

the pump housing. 

 

2004 Acura TSX 

2004 STEERING Power Steering System - TSX

  

 

 

 

 

 

 

 

 

Content   ..  187  188  189  190   ..