Acura TSX / Honda Accord CL. Manual - part 175

Fig. 64: White Raster Display 

Black Raster 

The entire display must be shown in black. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

  

 

Fig. 65: Black Raster Display 

Test Pattern 

The chart below; shows the colors being used for the map and menu screens. This is for factory use only. To 
check the color signal use the "RGB Color" diagnostic.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

  

 

Fig. 66: Test Pattern Display 

Monitor Adjustment 

This allows the navigation display to be centered. Use the joystick to move the picture up/down or left/right. It 
is unlikely that you will ever need to adjust the monitor position. The "Default" button will reset the display 
position to factory specifications. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX

  

 

Fig. 67: Monitor Adjustment Display 

Touch Panel Check 

The panel touch sensing system consists of a touch sensitive resistive membrane covering the display. Contrary 
to other systems using infrared beams, the screen has to be physically "touched" to make it work. The display 
has capability of an almost infinite number of touch locations. However, to be compatible with earlier systems, 
the software only senses the locations shown on the diagnostic screen below. Every possible touch button 
position is shown on this diagnostic screen. Touching one of these areas should cause its color to reverse, and 
sound a "beep". If the touch locations are off slightly (by less than one touch location), use the "Touch Panel 
Calibration" diagnostic to re-align the touch "zones" with the screen image. If any areas of the screen either 
don't respond, or respond at some other location when touched, then replace the display unit. 

NOTE:

Unlike earlier screens that used infrared sensors, direct sunlight will not affect 
this test.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Navigation System - TSX