Acura TSX / Honda Accord CL. Manual - part 125

4. If the continuity is not specified, replace the door lock actuator.  

REAR DOOR 

1. Remove the left or right rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ).  

2. Disconnect the 3P connector from the actuator. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

  

 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

  

 

Fig. 12: Disconnecting The 3P Connector From The Actuator

3. Check for continuity between the terminals. 

z

There should be continuity between the No. 1 and No. 3 terminals when the door lock knob switch 
is UNLOCK position and no continuity when the switch is in the LOCK position.  

4. If the continuity is not as specified, replace the door lock actuator.  

DOOR KEY CYLINDER SWITCH TEST 

1. Remove the driver's door panel (see FRONT DOOR PANEL REMOVAL/INSTALLATION ).  

2. Disconnect the 3P connector from the key cylinder switch. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX

  

 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Keyless Entry/Security Alarm System - TSX