|
|
1. Remove the trim as shown. To remove the high mount brake light, first disconnect the bulb socket. 2. Install the trim in the reverse order of removal, and note these items: z Replace any damaged clips. z When installing the rear shelf, slip the rear seat belts and center seat belt through the slits and hole z Make sure the high mount brake light bulb socket is connected securely. Fig. 76: Removing & Installing Rear Shelf Area Trim (Without Side Curtain Airbag) C-pillar - With Side Curtain Airbag NOTE: z Put on gloves to protect your hands. z When prying with a flat-tip screwdriver, wrap it with protective tape to z Take care not to bend or scratch the trim and panels.
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX
|