Acura TSX / Honda Accord CL. Manual - part 93

REAR DOOR GLASS & REGULATOR REPLACEMENT

1. Remove these items: 

a. Door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION )  

b. Plastic cover, as necessary (see COMPONENT LOCATION INDEX )  

2. Carefully move the glass (A) until you can see the bolts, then remove them. Remove the glass from the 

regulator (B), and carefully lower the glass. Take care not to drop the glass inside the door. 

NOTE:

Put on gloves to protect your hands.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

  

 

Fig. 49: Removing The Glass From The Regulator 

3. Pull the glass run channel (A) away as needed. Pull the door weatherstrip (B) away as needed, then 

remove the screw (C) with a Torx T15 bit. Remove the bolt (D) securing the center channel (E). 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

  

 

Fig. 50: Pulling The Door Weatherstrip Away 

4. Pull the upper portion of the center channel (A) forward to remove it from the door quarter glass seal (B), 

then pull the glass run channel (C) out from the groove of the center lower channel. Take care not to 
damage the outer weatherstrip (D). 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX

  

 

Fig. 51: Pulling The Glass Run Channel Out From The Groove Of The Center Lower Channel 

5. Lower the center channel (A) entirely inside the door, then pull out the channel through the hole in the 

door. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Interior Trim - TSX