Acura TSX / Honda Accord CL. Manual - part 40

Fig. 35: Removing The Front Fender Fairing

5. Install the fender fairing in the reverse order of removal, and note these items:

Replace any damaged clips.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

Before installing the clips in the door opening area, install the front fender fairing (A) to the front
fender (B) properly as shown.

Push the clips into place securely.

Fig. 36: Installing The Front Fender Fairing

REAR INNER FENDER REPLACEMENT

1. Remove the rear inner fender (A).

a. On the front of the wheel arch, remove the screws (B) securing the side sill panel (C) and rear inner

NOTE:

Take care not to scratch the body.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

fender, and the clip (D) securing the rear inner fender and middle floor under cover (E).

b. On the rear bumper (F), remove the screws (G).

c. From the wheel arch, remove the clips (H, I).

d. Pull the rear inner fender out.

Fig. 37: Removing The Rear Inner Fender

2. Install the inner fender in the reverse order of removal, and note these items:

Replace any damaged clips.

Push the clips into place securely.

REAR AIR OUTLET REPLACEMENT

1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).

2. Detach the hooks (A), then remove the rear air outlet (B). Take care not to scratch the body.

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX

Fig. 38: Removing Rear Air Outlet

3. Install the air outlet by pushing on the hook portions until the hooks snap into place.

OPENERS

COMPONENT LOCATION INDEX

2004 Acura TSX

2004 ACCESSORIES & EQUIPMENT Exterior Trim - TSX