Acura TSX / Honda Accord CL. Manual - part 27

1. Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).  

2. Remove the connectors (A) from the headlight assembly (B). 

Fig. 26: Removing The Headlight Assembly 

3. Remove the four mounting bolts and the harness clip, then remove the headlight.  

4. Remove the bolt and the corner upper beam (C) from the headlight.  

5. Install the headlight in the reverse order of removal. 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX

  

 

6. After replacement, adjust the headlights to local requirement.  

LICENSE PLATE LIGHT REPLACEMENT 

1. Open the trunk lid.  

2. Push the retaining spring (A), then remove the light. 

NOTE:

Be careful not to damage the bumper.

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX

  

 

Fig. 27: Removing The License Plate Light

3. Disconnect the 2P connector (B) from the light.  

TAILLIGHT REPLACEMENT 

TAILLIGHT 

1. Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).  

2. Open the trunk lid and remove the trunk side trim panel (see TRIM REMOVAL/INSTALLATION - 

TRUNK AREA ).  

3. Disconnect the connectors (A) from the taillight (B). 

Brake/Taillight: 21/5 W 

Turn Signal Light: 21 W 

Side Marker Light: 3CP 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX

  

 

Fig. 28: Removing Taillight 

 

2004 Acura TSX 

2004 ACCESSORIES & EQUIPMENT Exterior Lights - TSX