|
|
4. Check for continuity between body ground and terminals A3 and A11 individually. Is there continuity? YES: Repair the short to body ground in the circuit between the audio unit and the radio NO: Replace the audio-HVAC display module. Fig. 52: Checking For Continuity Between Body Ground & Terminals A3 & A11 AUDIO-HVAC SUBDISPLAY/CLOCK DOES NOT DISPLAY 1. Check the connections at the audio-HVAC subdisplay/clock 10P connector and the audio-HVAC display panel connector C (10P). Are the connectors and terminals connected properly? YES: Go to step 2. NO: Repair the connection and recheck. 2. Check for continuity between the audio-HVAC subdisplay/clock 10P connector and the audio-HVAC display panel connector C (10P) terminals for each wire listed in the chart. See Fig. 53 .
2004 Acura TSX 2004 ACCESSORIES & EQUIPMENT Audio System - TSX
|