Mazda Transaxle FN4A-EL. Manual - part 2

 

  Index      Mazda     Mazda Automatic Transaxle FN4A-EL - service manual 2002 year

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  1  2  3   ..

 

 

Mazda Transaxle FN4A-EL. Manual - part 2

 

 

GI–2

HOW TO USE THIS MANUAL , ABBREVIATIONS

RANGE OF TOPICS

A6E201000001A01

This manual indicates only changes/additions, as it is the supplemental for the related materials. Therefore it 
may not contain the necessary reference service procedures to perform the services indicated in this manual.

End Of Sie

ABBREVIATIONS TABLE

A6E203000011A01

End Of Sie

HOW TO USE THIS MANUAL

ABBREVIATIONS

ATF

Automatic transaxle fluid

SST

Special service tool

1st GR

First gear

2nd GR

Second gear

3rd GR

Third gear

4th GR

Forth gear

K1–2

OUTLINE 

SUPPLEMENTAL SERVICE INFORMATION

A6E560201034A01

The following changes have been made since publication of the Mazda Automatic Transaxle Workshop Manual 
(1623-10-98E.).

AUTOMATIC TRANSAXLE DISASSEMBLY

Oil pressure switch has been added.

ACCUMULATORS DISASSEMBLY/ASSEMBLY

Spring specification has been modified.

CLUTCH COMPONENT DISASSEMBLY/ASSEMBLY

Assembly procedure has been modified.

DIFFERENTIAL DISASSEMBLY/ASSEMBLY

Conclusion type of differential ring gear has been added.

Assembly procedure has been modified.

AUTOMATIC TRANSAXLE ASSEMBLY

Oil pressure switch has been added.

AUTOMATIC TRANSAXLE INSPECTION

3-4 Clutch clearance has been modified.

End Of Sie

OUTLINE

AUTOMATIC TRANSAXLE 

K1–3

K1

AUTOMATIC TRANSAXLE DISASSEMBLY

A6E561401030A01

Precaution
General notes

The oil pan could contain small chips, shavings, and other particles which may be helpful in inspecting the 
condition of the transaxle and diagnosing certrain problems.
To ensure that all foreign particles stay in the oil pan, make sure that the transaxle is never tipped completely 
over while the oil pan is still installed.

1. Disassemble the transaxle in a clean area (dustproof work space) to prevent entry of dust into the 

mechanisms.

2. Inspect the individual transaxle components in accordance with the QUICK DIAGNOSIS CHART during 

disassembly.

3. Use only plastic hammers when applying force to separate the light alloy case joints.
4. Never use rags during disassembly; they may leave particles that can clog fluid passage.
5. Several parts resemble one another; arrange them so that they do not get mixed up.
6. Disassemble the control valve component and thoroughly clean it when the clutch or brake band has 

burned or when the ATF has degenerated.

Warning

••••

Although the stand has a self-locking brake system, there is a possibility that the brake may not 
hold when the transaxle is held in a lopsided position on the stand. This would cause the transaxle 
to turn suddenly, causing serious injury. Never keep the transaxle tilted to one side. Always hold 
the rotating handle firmly when turning the transaxle.

AUTOMATIC TRANSAXLE

 

 

 

 

 

 

 

Content   ..  1  2  3   ..