|
|
CONTROL SYSTEM [FS] 01–40B–9 01–40B FAN3 (Cooling fan ON/OFF Cooling fan operating (ECT above ° C {207 ° F}) or terminal TEN grounded and throttle valve open or Inspect following PIDs: RPM, TP, 47 FP (Fuel pump relay) ON/OFF Ignition switch ON: OFF Inspect following PID: RPM 80 FPRC (PRC solenoid ON/OFF Ignition switch ON: OFF Inspect PRC solenoid valve 95 FTL V (Fuel tank level V Idle condition • Fuel tank full: 1.0—1.5 V • Fuel tank empty: 4.4—4.8 V • Fuel tank half: 2.8—3.4 V Note • The voltages above will be Inspect fuel gauge sender unit 63 FTP (Fuel tank kPa Hg Ignition switch ON: 0—1.0 kPa Note • The pressure and output Inspect fuel tank pressure sensor 62 V Ignition switch ON: 2.5—2.8 V Note • The pressure and output Inspect fuel tank pressure sensor 62 FTP1SV kPa Perform “DTC INSPECTION”. — FTP2SV kPa FUELPW1 (Fuel ms Ignition switch ON: 0 msec Inspect following PIDs: MAF, IAT, 74, 75, 100, 101 GEAR 1/2/3/4 1GR: 1 Inspect following PIDs: SSA/SS1, 1, 27, 82, 99, 102 HTR11 (HO2S heater ON/OFF Ignition switch ON (engine stopped): ° C {68— 86 ° F}*: ON Others: ON ⇔ OFF Inspect following PIDs: ECT V, MAF 94 HTR12 (HO2S heater ON/OFF ECT above 70 ° C {158 ° F}: ON HO2S (Rear) heater is Inspect following PIDs: ECT V, MAF 93 Monitor item (Definition) Unit/ Condition Condition/Specification (Reference) Action PCM terminal 1712-1U-01G(01-40B).fm 9 ページ 2001年6月29日 金曜日 午前9時51分 |