Frelander 2. Manual - part 745

Telephone

258

L

TELEPHONE SETUP

Telephone main menu

Press the MENU button then rotate the ENTER 
button to select from:
• Missed calls
• Received calls
• Dialled calls
• Phonebook 

•  See PHONEBOOK (page 266).

• Bluetooth 

•  See BLUETOOTH SETUP (page 256).

• Phone settings
• Clock 

•  See CLOCK (page 107).

Press the ENTER button to confirm your 
selection.

Missed calls

The audio unit display will list the numbers of 
the last 10 calls which have been missed. 
These are displayed in chronological order, 
with the last number missed first and 
highlighted.

Note: Some mobile telephones reverse the 
missed call list, which results in the last missed 
call number being at the bottom of the list, 
rather than the top.

 Rotate the ENTER button to select the number, 
then press again or operate the answer call 
switch on the steering wheel to dial the 
number.

If there are no entries, an empty list is shown, 
press EXIT to return to the phone view.

Note: When viewing missed calls, do not rotate 
the volume button as this will result in your 
highlighted selection returning to the first entry 
in the list, irrespective of your previously 
highlighted position.

Received calls

The audio unit display will list the numbers of 
the last 10 calls which have been received. 
These are displayed in chronological order, 
with the last number received first and 
highlighted.

Note: Some mobile telephones reverse the 
received call list, which results in the last 
received call number being at the bottom of the 
list, rather than the top.

 Rotate the ENTER button to select the number, 
then press again or operate the answer call 
switch on the steering wheel to dial the 
number.

If there are no entries, an empty list is shown, 
press EXIT to return to the phone view.

14 : 54

Ericsson T39

SELECT

EXIT

Phonebook..

Dialled Calls..

Bluetooth..

E83808

259

Telephone

R

Note: When viewing received calls, do not 
rotate the volume button as this will result in 
your highlighted selection returning to the first 
entry in the list, irrespective of your previously 
highlighted position.

Dialled calls

The audio unit display will list the numbers of 
the last 10 calls which have been dialled. These 
are displayed in chronological order, with the 
last number dialled first and highlighted.

Note: Some mobile telephones reverse the 
dialled call list, which results in the last dialled 
call number being at the bottom of the list, 
rather than the top.

The dialled calls list can also be accessed by 
pressing the ENTER button, when telephone 
mode is selected.

 Rotate the ENTER button to select the number. 
Then to dial the number, press ENTER again, or 
operate the answer call switch on the steering 
wheel.

If there are no entries, an empty list is shown, 
press EXIT to return to the phone view.

Note: When viewing dialled calls, do not press 
the volume button as this will take you back to 
the radio or CD.

Phone settings

Select Call options from the Phone Settings 
menu, and press the ENTER button.

Call options

This feature is used to turn the automatic 
answer facility on or off and also to enter the 
voice mail number.

Rotate the ENTER button to highlight 
Automatic answer and press the ENTER 
button. Select On and press the ENTER button 
again.

When automatic answer is on, all incoming 
calls are answered automatically and when the 
mode is off you must accept the call or press 
EXIT to reject.

To enter a voice mail number, rotate the ENTER 
button to highlight Voicemail number and 
press the ENTER button. Enter your voice mail 
number on the keypad and press the ENTER 
button again.

Use the EXIT button to delete an incorrect 
number.

SELECT

EXIT

Automatic answer

Voicemail number

E83809

Telephone

260

L

Sounds and alerts

Selecting sounds and alerts gives you the 
choice to alter the ring tone and the ring 
volume.

To select the ring volume, rotate the ENTER 
button to highlight Ring volume and then 
press the ENTER button to select. Now by 
rotating the On or off or volume button you can 
change the ring volume.

Note: If the ring volume is not changed, the 
ring tone will sound for eight seconds. If the 
ring volume is changed, the ring tone will 
return to the menu two seconds after the 
change has been made. 

This only applies to the Car ring tones. If 
Mobile ring tone is selected, no ring tone will 
be played. When Mobile ring tone has been 
selected, the volume can only be changed 
when there is an incoming call, i.e. ringing.

Select ring tone by rotating the ENTER button 
to highlight Ring tone and then press the 
ENTER button to select. Rotate the ENTER 
button to select one of the four alternative ring 
tones, or use the mobile telephone ring tone. 
Once you have selected a ring tone, press the 
ENTER button to hear the selected ring tone. 

Note: This only applies to the Car ring tones. If 
Mobile ring tone is selected, no ring tone will 
be played. When Mobile ring tone has been 
selected, the volume can only be changed 
when there is an incoming call, i.e. ringing.

SELECT

EXIT

Sounds and alerts..

Call options..

AutoCopy Ph.Book..

E83810

Ring
Volume

27

E83811

Ring
Volume

Mute

Ring
Volume

Max

SELECT

EXIT

Car ring tone 1

Car ring tone 2

Mobile ring tone

YES

NO

Car ring tone 1

Store:

E83812

261

Telephone

R

Another brief press of the ENTER button will 
store the tone. If you press the EXIT button the 
tone will not be stored and the ring tone menu 
will remain visible. Press the EXIT button again 
to return to the main menu or to the function 
previously selected.

Note: Not all mobile telephones support 
Mobile ring tone, in this case it will not be 
possible to select and store the Mobile ring 
tone setting in the vehicle system.

Autocopy phonebook

This feature allows you to choose whether or 
not your phone book is automatically updated 
every time you connect your telephone to the 
vehicle system. If On is selected and your 
telephone has the capability, the vehicle phone 
book will be updated the next time the 
telephone is connected to the vehicle. If Off is 
selected the phone book will not be 
downloaded to the vehicle system.  See 
PHONEBOOK (page 266).

Press the ENTER button after making your 
selection. Pressing the EXIT button will return 
you to the previous screen. To return to the 
telephone main display, press and hold the 
EXIT button.

USING THE TELEPHONE

Selecting telephone mode

Switch on the ignition. If your telephone is 
switched on and previously paired or 
connected with the system, you can select the 
vehicle telephone system.

Briefly press the telephone mode button 
(arrowed). Visual confirmation of telephone 
operation is given via the display.

If a telephone is not paired to your vehicle 
system, No paired Phone and Do you want to 
pair? is displayed.  See BLUETOOTH SETUP 
(page 256).

To exit telephone mode, press one of the audio 
system mode buttons, i.e. FM, AM or CD or 
AUX.

Telephone display

There are four different call status screens:

SELECT

EXIT

On

Off

E83813

14 : 54

ricsson T39

E83788