Frelander 2. Manual - part 741

Digital audio broadcasting

242

L

From the DAB settings menu, choose DAB 
radio text. Rotate the menu control and press 
to select one of the following:

• Ensemble name to display the name of the 

ensemble to which the current channel 
belongs.

• PTY to display the name of the ensemble to 

which the current channel belongs. 

• Off to display only the channel name.

Advanced settings

From the DAB settings menu, choose 
Advanced settings. Use the menu control to 
navigate the menu options below.

Link DAB

Some DAB channels are broadcast in a number 
of different ensembles. For example, some 
national channels may broadcast a number of 
regional variations of the same channel under 
different ensembles.

EXIT

SELECT

Ensemble name
PTY
Off

EXIT

SELECT

Auto-tune

DAB radio text

Advanced settings

E88136

E88137

14 : 54

1 2 3 4

DAB1 [1] 
BBC 5LIVE
BBC National DAB

E88138

14 : 54

1 2 3 4

DAB1 [1] 
BBC 5LIVE
Sport

E88139

14 : 54

1 2 3 4

DAB1 [1] 

BBC 5LIVE

EXIT

SELECT

DAB radio text

Advanced settings

FM traffic

E89492

243

Digital audio broadcasting

R

If the Link DAB setting is switched on and the 
signal strength for a channel falls below an 
acceptable level, the audio unit will 
automatically search other available ensembles 
for a channel with the same name. 

If an alternative local channel is found, then the 
message Switching ensemble is displayed and 
the new channel is played automatically after 
few seconds. If the channel is not found after a 
few seconds, the message No signal is 
displayed.

DAB country

If you move the vehicle to a different country, 
you can change DAB country setting to make 
sure that the audio unit gives the best possible 
reception and sound quality. Rotate the menu 
control to highlight the new country in the list. 
Press and release the menu control to check 
the box next to the selected country.

Note: When you change the DAB country, the 
audio unit automatically starts auto-tuning. 
See CHANNEL AUTOMATIC TUNING 
(page 236).

EXIT

SELECT

Link DAB

DAB country
Band selection

EXIT

SELECT

On

Off

E88140

E88141

EXIT

SELECT

Link DAB

DAB country

Band selection

EXIT

SELECT

Australia

Austria
Belgium

Digital audio broadcasting

244

L

Band selection

Different regions or countries may use different 
digital bands to broadcast DAB channels. If you 
know the band(s) required then you can 
choose from the Band selection menu. The 
available bands are: 
• LBand
• BandIII
• LBand & BandIII
• LBandCanada
• LBandCan & BandIII

Reset DAB settings

If you want to reset the DAB settings to the 
manufacturer's defaults, use the menu control 
to choose the Reset DAB settings menu 
option. Press the menu control again to 
confirm the reset.

FM traffic and news

The FM traffic function detects the presence of 
local travel announcements, while the FM news 
function detects local news announcements. 
As soon as an announcement is received, radio 
reception or CD play is interrupted. At the end 
of the announcement, radio or CD play will 
resume. You can use this menu option to turn 
announcements on or off.

From the DAB settings menu, choose FM 
traffic or FM news and then press and release 
the menu control to select either On or Off. To 
cancel a traffic or news announcement and 
return to the digital channel, press and release 
the EXIT button. Cancelling an announcement 
temporarily will not prevent further 
announcements from broadcasting when they 
become available. 

Note: 

Both traffic and news information can be 
selected at the same time. However, the audio 
unit will always give priority to traffic 
information.

Note: 

Traffic and news announcements are not 
currently available from DAB services, so the 
audio unit switches to an FM channel just for 
the duration of the announcement, so there 
may be some temporary loss of sound quality.

EXIT

SELECT

Advanced settings

FM traffic

FM news

EXIT

SELECT

On

Austria

Off

E88142

245

Compact disc player

R

Compact disc player

LOADING COMPACT DISCS

Note: Some music CD manufacturers are 
using data encryption to copy-protect their 
recordings and prevent the production of 
counterfeit copies. These CDs differ from the 
internationally agreed CD audio standard, 
RedBook, a standard that serves as the 
operating basis for all CD players and 
changers. Copy-protected CDs may fail to play 
in your CD changer or may be played subject to 
various limitations, e.g. sound quality may be 
impaired. If you do experience a problem, try 
the CD in other players before contacting the 
CD vendor.

Loading a CD - Single disc player

To insert a disc into the player, make sure that 
the label side of the disc is facing upwards and 
present the disc to the slot. Ease the disc into 
the slot until the mechanism takes over and 
draws the disc in fully.

Loading a CD - Six disc player

Press the CD mode button, then press the 
numbered button of the position in which the 
compact disc is to be stored (1 to 6).

Make sure that the label side of the disc is 
facing upwards then, when prompted, partially 
insert the disc. The player mechanism will draw 
the disc in automatically and the disc number 
will appear on the display.

Note: If there is a problem with a disc that has 
been loaded (inserted upside down, wrong 
format etc.), Disc unreadable or Disc error will 
appear in the information display, and the disc 
will be ejected. If the problem can be corrected 
(disc upside down for example), then re-insert 
the disc in the correct manner. If the problem 
cannot be rectified, do not re-insert the disc.

There will be a pause while the player reads 
information from the disc, then play will start at 
the first track.

To load another CD, press another numbered 
button (1 to 6) and repeat the loading 
procedure.

Note: The six circles in the top right-hand side 
of the information display of the premium unit, 
represent the six available CD positions. As 
soon as a CD is loaded, its number will appear 
in the circle.

Load all

This feature is only available on the standard 
audio, six disc CD player.

1. Press and hold the CD button until Load 

All appears on the display.

2. When prompted, partially insert the first 

disc. The player mechanism will draw the 
disc in automatically.

3. When prompted, continue to insert discs 

until all six discs have been loaded. When 
fully loaded, the CD player will commence 
playing CD1.

CAUTION

Do not force the disc into the slot.

CAUTION

Do not use discs with paper labels, Dual 
Discs or DVDPlus discs. The front 
loading CD player may load and play this 

type of disc, however, it is likely that the disc 
will not eject and will block the CD mechanism. 
Such damage to a CD player will not be 
covered under warranty.