|
|
ENGINE 32 OVERHAUL Oil pressure relief valve 1. Remove plug retaining oil pressure relief valve. Inspecting components 1. Check rotor clearances. A - Outer rotor to housing = 0.025 to 0.075 mm 2. Remove inner and outer rotors. length is 68.0 mm. 6. Check plunger and relief valve bore for wear and scoring. 7. Clean all traces of sealant from oil pump cover using solvent from kit GUG 705548GM. 8. Remove all traces of sealant from relief valve plug threads in oil pump body. CAUTION: Do not use a tap. |