|
|
47. Install a new differential lock pivot nut. Tighten to 25 Nm 48. Install the high-low selector lever onto the gearbox. Tighten to 7 Nm 49. Install the foam pad. 50. Install the upper gear change lever. 51. Install the gear selector lever gaiter. Secure the gear selector lever gaitor to the transmission tunnel. Secure the gear selector lever gaitor to the high-low selector lever. 52. Install the transmission cover panel carpet. For additional information, refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation). 54. Connect the battery ground cable. For additional information, refer to: Battery Disconnect and |